54
FollowersManufacturerTschorn GmbH
Product group Chucks, others
Product NameFlexiClamp Aufspannbolzen
Product images
Description
Build your own clamping system!
You only buy what you need!
Full flexibility thanks to the modular principle
New, incredibly fast and individual application: FlexiClamp
Assemble your FlexiClamp clamping system with the parts you need for your machining!
The FlexiClamp bolts are a modern combination of an aluminum body and hardened steel surfaces. The bolts are available in heights of 50 and 80 mm. The bolts are positioned and fastened using a centric screw with a hexagonal wrench while the bolt is stationary - without any undesired twisting.
You can reach any position on the machine table with the help of the transvers T-slot bar.
Quick setting with the clamping bolts: move each single bolt without clamping screw into the slide block of the machine table and position the bolt by hand as a stopper at the workpiece. Tighten the clamping bolt and it automatically helps you to position the workpiece.
Flexible for diverse workpiece shapes: no matter if round, oval, quadratical or even pentagonal - with the help of the clamping bolts, you can clamp all forms.
Safely fixed: the clamping screws are added from above. They clamp the workpiece powerfully and securely. A soft exchangeable brass ring avoids damages or scratches at the workpiece.
Drill-through: there is not much disturbing space under the workpiece - no clamping jaws, no base, nothing is disturbing when you drill-through your workpiece with diverse divisions of pitch circles.
The small disturbing contour enables multi-purpose machining even at places which you normally hardly reach.
FlexiClamp is also suitable for series production, since the workpiece can be changed in just a few simple steps using the bearing clamping screw.
Decide which screw you need: Standard screw for small to medium-sized series: minimized interfering contours thanks to the very flat screw head.
Or: Bearing clamping screw also for large series: Faster workpiece changes due to the innovative contour of the bearing screw head.
Decide which clamping height you need: Stable extension of the clamping height by 20 or 40 mm through a rigid extension with the same clamping screw length.
You only buy what you need!
Full flexibility thanks to the modular principle
New, incredibly fast and individual application: FlexiClamp
Assemble your FlexiClamp clamping system with the parts you need for your machining!
The FlexiClamp bolts are a modern combination of an aluminum body and hardened steel surfaces. The bolts are available in heights of 50 and 80 mm. The bolts are positioned and fastened using a centric screw with a hexagonal wrench while the bolt is stationary - without any undesired twisting.
You can reach any position on the machine table with the help of the transvers T-slot bar.
Quick setting with the clamping bolts: move each single bolt without clamping screw into the slide block of the machine table and position the bolt by hand as a stopper at the workpiece. Tighten the clamping bolt and it automatically helps you to position the workpiece.
Flexible for diverse workpiece shapes: no matter if round, oval, quadratical or even pentagonal - with the help of the clamping bolts, you can clamp all forms.
Safely fixed: the clamping screws are added from above. They clamp the workpiece powerfully and securely. A soft exchangeable brass ring avoids damages or scratches at the workpiece.
Drill-through: there is not much disturbing space under the workpiece - no clamping jaws, no base, nothing is disturbing when you drill-through your workpiece with diverse divisions of pitch circles.
The small disturbing contour enables multi-purpose machining even at places which you normally hardly reach.
FlexiClamp is also suitable for series production, since the workpiece can be changed in just a few simple steps using the bearing clamping screw.
Decide which screw you need: Standard screw for small to medium-sized series: minimized interfering contours thanks to the very flat screw head.
Or: Bearing clamping screw also for large series: Faster workpiece changes due to the innovative contour of the bearing screw head.
Decide which clamping height you need: Stable extension of the clamping height by 20 or 40 mm through a rigid extension with the same clamping screw length.
{{ this.trans('product.manufacturer') }} {{ $parent.product.manufacturer }}
{{ this.trans('product.product_group') }} {{ $parent.product.producttype }} | {{ $parent.product.category.title }} {{ $parent.product.category.title }}
{{ this.trans('product.itemnumber') }} {{ $parent.product.itemnumber }}
{{ this.trans('product.techdata') }}
{{ key }}
{{ key }} {{ value }}
{{ this.trans('product.techinfo') }}
{{ key }} {{ value }}
Description
Product images
{{ this.trans('product.manufacturer') }} {{ $parent.product.manufacturer }}
{{ this.trans('product.product_group') }} {{ $parent.product.producttype }} | {{ $parent.product.category.title }} {{ $parent.product.category.title }}
{{ this.trans('product.itemnumber') }} {{ $parent.product.itemnumber }}
{{ this.trans('product.techdata') }}
{{ key }}
{{ key }} {{ value }}
{{ this.trans('product.techinfo') }}
{{ key }} {{ value }}
Description
Product images