Supply bottlenecks holding back machine tool production
Supply bottlenecks holding back machine tool production
Growth not expected until next year in some areas
Frankfurt am Main, 25 November 2021. – Orders received by the German machine tool industry in the third quarter of 2021 were 69 percent up on the previous year's figure. Orders from Germany rose by 67 percent. Foreign orders were 71 percent higher than in the previous year. Orders received by German manufacturers increased by 61 percent in the first three quarters of the year. Domestic orders were 47 percent higher than in the same period last year, foreign orders 69 percent.
“The levels of orders on hand are good. However, supply bottlenecks and sharp rises in the price of raw materials and components are increasingly holding back business," says Dr. Wilfried Schäfer, Executive Director of the VDW (German Machine Tool Builders' Association), Frankfurt am Main, commenting on the result. "Orders are expected to continue rising in the coming months. They are being driven by catch-up effects that will continue for quite some time," Schäfer adds. However, it may not always be possible to translate the orders into sales as desired, as the machines can only be delivered with delays due to a lack of parts, especially electronic components. "And that is why we are having to scale this year’s summer forecast of 8 percent growth down to 5 percent," Schäfer concedes. Double-digit growth is expected, by contrast, in the coming year.
Orders are also slowly catching up in relation to the figures posted in 2019, the year before the pandemic, which is generally considered to provide a more meaningful evaluation of the current situation. The figures for the first nine months are 4 percent higher than for the same period in 2019. However, the domestic market is still 12 percent below the 2019 level. "The all-important automotive industry is suffering particularly from the chip shortage in Germany and is therefore cutting back on investment," explains Schäfer. The main driving force is foreign orders, where an increase of 13 percent was posted. Of the top 15 machine tool customers, two-thirds are back above the 2019 mark, especially Austria and Italy. The exceptions are Poland, France and the UK, which have not yet returned to their pre-crisis levels.
The strong demand is resulting in a noticeable increase in capacity utilization. This was 86 percent in October compared to 71 percent as the average for last year. Employment, a delayed indicator of economic development, has not yet bottomed out. This September it was 8.5 percent below last year’s figure of 63,300 employees. At the same time, 46 percent of companies reported a considerable shortage of skilled workers in a recent VDMA survey. There is currently a shift in demand towards more electronics-based skills.
"All in all, our industry considers itself well on the way towards overcoming the crisis. We expect supply chains to stabilize again in the coming year. Our industry will then be able to continue its recovery," says Schäfer in conclusion.
Background
The German machine tool industry ranks among the five largest specialist groupings in the mechanical engineering sector. It provides production technology for metalworking applications in all branches of industry, and makes a crucial contribution towards innovation and enhanced productivity in the industrial sector as a whole. Due to its absolutely key role for industrial production, its development is an important indicator for the economic dynamism of the industrial sector as such. In 2020, with an average of 70,000 employees (firms with more than 50 staff), the sector produced machines and services worth around 12.2 billion euros.
Picture:
Dr. Wilfried Schäfer, Executive Director of the VDW (German Machine Tool Builders’ Association), Frankfurt am Main
Graphic: Order bookings in the German machine tool industry
You can also obtain this press release directly at https://vdw.de/en/press/press-releases/ and https://vdw.de/en/supply-bottlenecks-holding-back-machine-tool-production/
You will also find graphics and pictures online under www.vdw.de in the Press section. You can also visit the VDW on our social media channels
www.youtube.com/metaltradefair
www.linkedin.com/company/vdw-frankfurt
Supply bottlenecks holding back machine tool production
Growth not expected until next year in some areas
Frankfurt am Main, 25 November 2021. – Orders received by the German machine tool industry in the third quarter of 2021 were 69 percent up on the previous year's figure. Orders from Germany rose by 67 percent. Foreign orders were 71 percent higher than in the previous year. Orders received by German manufacturers increased by 61 percent in the first three quarters of the year. Domestic orders were 47 percent higher than in the same period last year, foreign orders 69 percent.
“The levels of orders on hand are good. However, supply bottlenecks and sharp rises in the price of raw materials and components are increasingly holding back business," says Dr. Wilfried Schäfer, Executive Director of the VDW (German Machine Tool Builders' Association), Frankfurt am Main, commenting on the result. "Orders are expected to continue rising in the coming months. They are being driven by catch-up effects that will continue for quite some time," Schäfer adds. However, it may not always be possible to translate the orders into sales as desired, as the machines can only be delivered with delays due to a lack of parts, especially electronic components. "And that is why we are having to scale this year’s summer forecast of 8 percent growth down to 5 percent," Schäfer concedes. Double-digit growth is expected, by contrast, in the coming year.
Orders are also slowly catching up in relation to the figures posted in 2019, the year before the pandemic, which is generally considered to provide a more meaningful evaluation of the current situation. The figures for the first nine months are 4 percent higher than for the same period in 2019. However, the domestic market is still 12 percent below the 2019 level. "The all-important automotive industry is suffering particularly from the chip shortage in Germany and is therefore cutting back on investment," explains Schäfer. The main driving force is foreign orders, where an increase of 13 percent was posted. Of the top 15 machine tool customers, two-thirds are back above the 2019 mark, especially Austria and Italy. The exceptions are Poland, France and the UK, which have not yet returned to their pre-crisis levels.
The strong demand is resulting in a noticeable increase in capacity utilization. This was 86 percent in October compared to 71 percent as the average for last year. Employment, a delayed indicator of economic development, has not yet bottomed out. This September it was 8.5 percent below last year’s figure of 63,300 employees. At the same time, 46 percent of companies reported a considerable shortage of skilled workers in a recent VDMA survey. There is currently a shift in demand towards more electronics-based skills.
"All in all, our industry considers itself well on the way towards overcoming the crisis. We expect supply chains to stabilize again in the coming year. Our industry will then be able to continue its recovery," says Schäfer in conclusion.
Background
The German machine tool industry ranks among the five largest specialist groupings in the mechanical engineering sector. It provides production technology for metalworking applications in all branches of industry, and makes a crucial contribution towards innovation and enhanced productivity in the industrial sector as a whole. Due to its absolutely key role for industrial production, its development is an important indicator for the economic dynamism of the industrial sector as such. In 2020, with an average of 70,000 employees (firms with more than 50 staff), the sector produced machines and services worth around 12.2 billion euros.
Picture:
Dr. Wilfried Schäfer, Executive Director of the VDW (German Machine Tool Builders’ Association), Frankfurt am Main
Graphic: Order bookings in the German machine tool industry
You can also obtain this press release directly at https://vdw.de/en/press/press-releases/ and https://vdw.de/en/supply-bottlenecks-holding-back-machine-tool-production/
You will also find graphics and pictures online under www.vdw.de in the Press section. You can also visit the VDW on our social media channels
www.youtube.com/metaltradefair
www.linkedin.com/company/vdw-frankfurt