3D-Druck mit der Fused Deposit Modeling-Technologie (FDM)
The FDM method used by us is based on solid engineering and enables low-cost 3D printing devices with many different plastics. Contact us for an individual offer.
• Pressure range: 400 x 210 x 220 mm
• Thickness: 0.02 0. 4 mm
This description was translated from German to English by "Bing Translator".
The via set up by us currently offers the highest resolution on the market (15 μm in the Z axis).
Water soluble support material, we reach a high attention to detail and can create complex geometries without having to make compromises in terms of support structures.
• Print area: 297 x 210 x 200 mm (DIN A4 size x 200 mm)
• Resolution: 635 x 400 dpi
• Thickness: 15 μm to 20 μm
This description was translated from German to English by "Bing Translator".
Fibre-reinforced components can be manufactured with our MarkOne polyamide. The currently only FFF printer has the market working with continuous fibers and a construction area of 320 mm x 132 mm x 160 mm (X, Y, Z). The filaments, which optionally can be embedded carbon - or Kevlarfasern as the length in the polyamide layers, increase the strength of the printed components in an impressive way.
The individual layers, it can be chosen and offers so many possibilities to react to occurring loads of the component.
This description was translated from German to English by "Bing Translator".
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.