Early error detection - for cost - and resource-saving production processes. With the ZEISS ABIS systems that can be used in different configurations and system concepts, you can capture error on the part quickly, safely and accurately.
This description was translated from German to English by "Bing Translator".
The automated measurement configuration T-SCAN laser scanner with the ZEISS enables highly efficient processes for your recurrent measuring tasks.
The particularly compact laser scanner boasts easy accessibility from hard to reach areas of component and provides precise 3D data within a very short time.
This description was translated from German to English by "Bing Translator".
Quick, intuitive and highly accurate 3D scanning - the handheld laser scanner ZEISS T-SCAN CS reaches a new dimension in coordinate metrology. The system provides maximum flexibility for a variety of applications.
This description was translated from German to English by "Bing Translator".
Capture 3D data of large objects thanks to the unique large measuring volume of the innovative ZEISS T-SCAN LV / T-TRACK LV Scanning and Trackingkombination now even faster and easier - the high scanning speed of the hand-held laser scanner and up to 35 m³ Trackingvolumen offer you maximum freedom of movement for an efficient measuring process.
This description was translated from German to English by "Bing Translator".
The Reference
ZEISS XENOS is at home wherever maximum precision is demanded in the measuring labs of research institutes, the aerospace industry and the optical industry. The high-end machine combines precision at the limits of what is technically feasible with a measuring range of nearly one cubic meter.
Checking focuses mainly on the influence of component errors (CMM geometry).
Before the use of Bridge-Check, the probe system must also be checked which can be accomplished using Probe-Check or CMM-Check.
The two-dimensional artifact (multi-sphere test standard - MSTS) consists of a steel plate featuring 25 inner sphere elements (highly precise ball bearing outer rings) in a regular grid pattern. The MSTS can be used on CMMs from all manufacturers.
CMM-Check can be used to check coordinate measuring machines in accordance with DIN EN ISO 10360 and VDI/VDE 2617.
The following features can be measured with the artifact and subsequently evaluated with the software:
- Probing behavior of the probe system
- Scanning performance of the probing system
- CMM as a form measuring machine incl. filter characteristics
- Linear measuring errors
- Four-axis error of the CMM with rotary table (optional)
Are performance and precision your top priorities? With its wide range of configurations, ZEISS ACCURA can be tailored to your needs and budget. Furthermore, the modular design makes the system futureproof: ACCURA can be modified to meet changing requirements on the configuration, sensors and software.
ZEISS MICURA sets the standard in the compact class. Despite its small size, ZEISS MICURA makes no compromises when it comes to accuracy. ZEISS MICURA comes standard with the VAST XT gold scanning sensor from ZEISS and navigator technology.
MMZ E gantry measuring machines are ideal for the inspection of workpieces that are transported via floor conveyors as they offer open access from all four sides. Crane loading can also be easily achieved. MMZ E measuring machines are used in the mechanical engineering, automotive and aerospace industries, and for the inspection of satellite technology. They are particularly well suited for the inspection of large freeform surfaces.
Large bridge-type machines in the MMZ G line meet the highest demands: they feature the largest measuring range of all measuring machines offered by Carl Zeiss with unparalleled accuracy. This makes them ideal for the inspection of complex large parts. MMZ G machines are used by manufacturers of printing machines and wind turbines, as well as the automotive and aerospace industries.
With a measuring range of up to 14.8 m³, the MMZ T line is the largest of the table bridge-type measuring machines from Carl Zeiss. It allows the highly precise measurement of large gears directly on the shop floor. The open design enables easy loading with a crane. A crane interlock to protect against collisions is a standard feature.
O-INSPECT multisensor measuring machines from ZEISS enable you to optimally measure each characteristic optically or by contact. An important feature: O-INSPECT delivers reliable 3D accuracy compliant with ISO standards at a temperature range of 18-30°C. An added highlight: CALYPSO software not only delivers results easily, but also simplifies the detection and identification of the causes of errors.
PRISMO navigator from ZEISS is synonymous around the world for high-speed scanning and maximum accuracy near production. With length measurement error of just 0.5+L/500 millimeters, ZEISS PRISMO ultra is ideal when maximum demands on precision have to be met.
The ZEISS PRO is a modular horizontalarm measuring machine that is very easy to configure and available in two versions: PRO advance and PRO premium. This means that it can be ideally tailored to meet your cost efficiency and performance requirements.
CenterMax® navigator fits smoothly into any production line and withstands all production environments: neither extreme temperature fluctuations nor typical floor vibrations affect its precision. Even large workpieces are no problem for CenterMax it can accept weights up to 1000 kg. The open design permits three-sided loading.
The ability to measure quickly and accurately and the flexibility to react to changes are essential in the machining and tooling industry. Fixed gages and inspection equipment are no longer economical. DuraMax is your answer.
The GageMax® CNC production center re-places fixed gages in the innovative machining, and cutting and reshaping industry and measures the entire range of parts in the process. In addition, it guarantees maxi mum precision in a production environment. The foundation for this is the computer-aided accuracy correction of the axes of motion and the insensitivity to dirt as a result of the fully enclosed machine axes.
Motorized microscope platform for advanced materials research and quality control
Axio Imager 2 is your system platform tailored to demanding materials analysis tasks, development of new materials as well as quality control. You always profit from crisp images and high optical performance. This applies in particular to sophisticated contrasting techniques, e.g. like the Circular Differential Interference Contrast (C-DIC) and polarization contrast. Use the motorized stand to achieve reproducible illumination settings and, consequently, constant image quality. You always obtain comparable results and high productivity by automating your workflow. Axio Imager 2 offers a high degree of adaptability in line with your future requirements. The stands are open to expand and cover a wide range of applications.
- Profit from brilliant optics for superb contrast and resolution
- Gain enhanced flexibility with the modular design concept with a range of motorized and encoded components
- Obtain reproducible results with its stable stand design and vibration-free working condition
- Upgrade your Axio Imager 2 with ZEISS LSM 800 confocal laser scanning module
- Use Axio Imager 2 for correlative microscopy workflows and particle analysis
- Achieve accurate reproduction in quality control and process control with its automated functions
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.