541,794 active members*
3,273 visitors online*
Register for free
Login Register
ZEISS Industrial Metrology Products
Carl Zeiss Industrielle Messtechnik GmbH
Reference standards for the acceptance and the control of coordinate measuring machines

ZEISS Bridge-Check

Checking focuses mainly on the influence of component errors (CMM geometry).
Before the use of Bridge-Check, the probe system must also be checked which can be accomplished using Probe-Check or CMM-Check.

The two-dimensional artifact (multi-sphere test standard - MSTS) consists of a steel plate featuring 25 inner sphere elements (highly precise ball bearing outer rings) in a regular grid pattern. The MSTS can be used on CMMs from all manufacturers.
Product details Homepage Product request
ZEISS CMM-Check
ZEISS CMM-Check
Calibration Artifacts
Carl Zeiss Industrielle Messtechnik GmbH
Reference standards for the acceptance and the control of coordinate measuring machines
ZEISS CMM-Check
CMM-Check can be used to check coordinate measuring machines in accordance with DIN EN ISO 10360 and VDI/VDE 2617.
The following features can be measured with the artifact and subsequently evaluated with the software:
- Probing behavior of the probe system
- Scanning performance of the probing system
- CMM as a form measuring machine incl. filter characteristics
- Linear measuring errors
- Four-axis error of the CMM with rotary table (optional)
Product details Homepage Product request