ZEISS Industrial Metrology
Products
446
Carl Zeiss Industrielle Messtechnik GmbH
Reference standards for the acceptance and the control of coordinate measuring machines
ZEISS CMM-Check
CMM-Check can be used to check coordinate measuring machines in accordance with DIN EN ISO 10360 and VDI/VDE 2617.
The following features can be measured with the artifact and subsequently evaluated with the software:
- Probing behavior of the probe system
- Scanning performance of the probing system
- CMM as a form measuring machine incl. filter characteristics
- Linear measuring errors
- Four-axis error of the CMM with rotary table (optional)
ZEISS Bridge-Check
|
Calibration Artifact
Carl Zeiss Industrielle Messtechnik GmbH
Reference standards for the acceptance and the control of coordinate measuring machines
Checking focuses mainly on the influence of component errors (CMM geometry).
Before the use of Bridge-Check, the probe system must also be checked which can be accomplished using Probe-Check or CMM-Check.
The two-dimensional artifact (multi-sphere test standard - MSTS) consists of a steel plate featuring 25 inner sphere elements (highly precise ball bearing outer rings) in a regular grid pattern. The MSTS can be used on CMMs from all manufacturers.
