Precision tools & clamping technology

Face milling cutter with a total of 4 inserts for a clean and first-class finish. Translated with DeepL

CNC graver from Amana Tool® with Spektra? ceramic coating. Made of solid carbide with 6mm shank and 30° point angle and a point width of 0.127mm. Excellent for detailed carving or marking work.

Engraving bits made of carbide. Set of 10 bits, Also suitable for finishing: font width 0,1 - 1,5mm.

Diamond toothed carbon cutter made of solid carbide with special Spektra? coating (nano-ceramic coating) for longer tool life. This cutter is available in 2 different diameters (3mm and 6mm).

Conical ball end mill with ZrN coating and 6.2° point angle for milling work in aluminum, wood, fiberglass, plastic, PVC, titanium. Translated with DeepL

Amana Tool® 48403-K double flute ball nose end mill with Spektra? Nano ceramic coating. Longer life for machining in wood, foam and composite. Translated with DeepL

Stone router bits in two different diameters (10 and 15mm) and with different angles. Can be used for milling and engraving sandstone, slate, marble and granite. The smaller the angle, the deeper the V-carving.

V-groove cutter 45624-K from Amana Tool® made of solid carbide with 3 cutting edges and a nACo nanocomposite coating 60° degree angle. Ideal for cutting V-grooves and decorative lettering. With a shank and cutting edge diameter of 6.35 mm. Translated with DeepL

Single flute 60° angle V-groove router bit for insert knives made of solid carbide. For milling in laminate, MDF, PVC, plywood, solid surfaces and more. Engravings succeed in aluminium, copper, brass, silver, etc.

This diamond-toothed solid carbide end mill for wood is suitable for the following materials: - HDF - MDF - hardwood - wood - CFRP, carbon fiber Available sizes: - cutting Ø: 0.60 - 3.18 mm - cutting length: 3 - 10.5 mm - shaft Ø: 3.18 mm - overall length: 38 mm

Endmill set made of solid carbide in industrial quality for aluminum, plastic and wood. The cutters have a fishtail cut and up-cut. Ideal for machining edges and contours, also suitable for processing printed circuit boards and carbon. - aluminum / plastic milling cutters: 2x1mm / 2x2mm / 1x3mm - wood cutter: 2x1mm / 2x2mm / 1x3mm

Solid carbide blades for Ecocam tangential knife modules. Available in different versions suitable for different materials and applications.

Tool holder for diamond bits This tool holder for diamond engraving bits can be used in any CNC milling machine with euro neck spindle and has also an automatic pressure regulation. Precision and quality of the engraving is guaranteed by the low backlash and the fitting accuracy of the tool holder.

This measuring indicator holder is designed for CNC milling machines and is mounted to the machine via a clamp to the Eurohals holder. All dial gauges with a shaft diameter of 8 mm can be used in this device. By mounting by knurled screw a positive and wobble-free connection is created. Included is a 90 ° connector, which allows a scan from flat surfaces.

With our handy chuck of 80 mm diameter you can mill precise and fast external threads on round workpieces. Also square tubes can be tensioned and processed without problems. Find out more on our website about our lathe chuck, which is also available as a three-jaw chuck.

With this practical three-jaw chuck with 80mm diameter you clamp round workpieces quickly and precisely. Besides, square pipes can be clamped and processed. Further information can be found on our website. We also have a four-jaw chuck in our assortment.

Toggle Clamp/Waag Right Clamp made of steel optionally available without or with adapter plate made of aluminum for T-slot plates with slot 8. You have the choice between small and large toggle clamp or push rod clamp. Toggle lever clamp small: clamping height 1-6 mm Large toggle clamp: clamping height 1-18 mm Push rod clamp: clamping height min. 15 mm Ideally suited for clamping sheet material and flat workpieces. Translated with DeepL

Clamping claw for clamping workpieces. Suitable for T-slot plates and work tables.

Clamping element for fixing and clamping. High clamping force. Suitable for T-slot plates and tables with 8 mm or 10 mm slot.

The hole grid rubber mat can be used with our vacuum tables and is currently available in two sizes. On request, other sizes can be supplied to match our tables. The mat increases the adhesion of the workpiece on the vacuum table by up to 30%. The mats can be purchased individually or in a practical advantage package with 5 mats. Translated with DeepL

Our vacuum tables offer you a strong clamping force and thus corresponding time savings during clamping. Drillings of 6mm make a precise positioning of the materials easier. The dowel pins can be inserted in small distances and due to the number of holes per square centimetre, a high clamping force is created. With our vacuum table system, unstable and flat materials can be clamped ideally. In our assortment, we offer vacuum tables in 10 different sizes (220x320mm to 1000x1500mm). Furthermore, other suitable accessories such as vacuum pumps, vacuum cleaners and side channel blowers are available from us. Please feel free to contact us, we will be glad to advise you! The vacuum table is delivered with the following accessories: - foam rubber mat - sacrificial rubber mat - rubber mat cover - dowel pins in two different sizes - adapter for vac

The centering vise is basically ideal for engraving and milling of small to medium-sized flat materials. However, optional clamping jaws and dowel pins can also be used to clamp and machine workpieces in special shapes. Our CNC-STEP centering vice is available in 2 sizes. Translated with DeepL

Our precision pull-down vices are available in 7 different sizes. Robust. precise, with high clamping force and made of tool steel. With prismatic grinding on the movable clamping jaw Translated with DeepL