Hello,
I was wondering if anyone knew if it is possible to slave axes in TurboCNC, so that a 4th (A) axis is geared 1:1 to the X axis for example.
George
Hello,
I was wondering if anyone knew if it is possible to slave axes in TurboCNC, so that a 4th (A) axis is geared 1:1 to the X axis for example.
George
At one time, I read that you could define two separate X axis that would move together, but if I recall correctly, they wouldn't jog together. Another workaround is two connect the step and direction signals from a single X axis to two separate drives. This may or may not work if your port can't supply enough current to run two drives. A 3rd option is to use the new drive being developed by a member here, which can slave axis in the drive itself.
http://www.cnczone.com/forums/showthread.php?t=33756
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)