After SPHC card has changed,now the machine always overtravell when zero return performed
Thanks for your attention Mr John
Type: Posts; User: Rizaldewa
After SPHC card has changed,now the machine always overtravell when zero return performed
Thanks for your attention Mr John
Dear friends,
How to set zero return procedure on Hitachi Seiki VM 40II,seicos 3?
Thank You,Have a nice day
Rizal
Memory Re-Initialization
Mitsubishi M-L10B-P Meldas 500L,
The problem are SFP Memory Areal Full and Auto Prog disappered on Data In/Out display screen after dead battery,which parameter i have to set?
GBU and many thanks
Set parameter #1043 from "0" to "1",the machine display will be in english,
Good Luck!
Turn the machine off and rotate the blue rotary switch on CPU from "0" to "7",turn the machine on again,wait about 1 minute until the 7 segmens display "Y",turn the machine off again,rotate the blue...
Clear the memory with blue switch on CPU but do you have parameters backup?
Alarm 17 means encoder problem,just change it
Many thank's Mr. Bill,it is very useful
good luck!
regards
Rizal
for fanuc 18m,you can edit plc ladder direct from pc to use fanuc ladder iii software trough rs232 port,or memory card
you can download it from
Fanuc Ladder III v4.6 - Sonsivri
good luck!
anyone knows how to drip feed on fanuc 9?
parameter setting,card option,etc?
thank's a lot
what is the type of your fanuc control?
Fanuc 0,fanuc 10,fanuc 18,etc?
Try to change parameter nos.
119 Spindle speed offset compensation value ( for S4-digit analog output A/B )
setting amount 0 - 8191
140 Gain adjustment of S4-digit analog output A/B
...