We just got a used 2014 HAAS VF-1 in our shop, and I need to get the pinout or wiring diagram to be able to wire the machine to the data transfer switch box that is in my programming office. We...
Type: Posts; User: Michael82
We just got a used 2014 HAAS VF-1 in our shop, and I need to get the pinout or wiring diagram to be able to wire the machine to the data transfer switch box that is in my programming office. We...
Ok this is what I'm trying to do and I need some advice....I have a pm727v that I have converted to cnc with closed loop steppers and now I have added or want to add a dyn4 servo drive and 1.0kw...
@ GM1G what ever happen ? There hasnt been a update in a while ..?????????
Glad to hear you all are ok ..kinda late but I'm just reading this new post. I come to this thread when I get stumped converting my benchtop mill and need ideas....thanks!!!
Have you had any luck with your project? I'm doing this very same thing im using a DYN4 H01A2 and the 11A-DST-A6HK1 motor to run as a spindle running off of 220v single phase. Have you looked at...
I found the problem the difference from this series fanuc and the doosan is the on the 1st g76 line the r value needed a . So ( R.002 ) rather than R20
We just bought a Hwacheon hi-tech 200 B it has a Fanuc oi-TD series control, this is the 1st time this machine has cut any single point thread, while it has done some tapping as a matter of fact that...
How did this work for you ? Have you had any issues with the belt while tapping???
Have you sold this machine??? 7500 ill get in line for that
This video shows to be private and I cant find the link to the GrabCAD drawings either ????
This issue was solved...it was posted in 2009
Sounds like a centroid acorn question go to their forum im sure someone there will help . You can try adding a number value after the z-5. Try something like z-5.001 this way the motor will have to...
Ess data monitoring screen is in the mach 3 drop down menu under the plug in control drop down menu. It's not a fix to show the signal it will just show if the system is reading it or not you need...
Do you have a picture of the auxiliary board ?? Does it look like the attached picture
Hey did u have any luck with this i am waiting on that same board and I have that same knock off board and I have the same doubts....if it is going to work with out the filter board ( the smaller...
This is the original wiring diagram
Since I couldn't get the rotary switch to work I went back to all original and now I keep blowing fuses and the relay sparks does anyone know what could have happened? I may have shorted something...
This is page 61 in the owners manual of the G0765 7 x 12 mini lathe on grizzly website down at the bottom of the page you can see the owners manual and parts list
I have also noticed it keeps popping the fuse when I turn the rotary switch to forward or reverse. The drawing does not show a jumper but the switch has 2 of them
Al can u look at the pictures and tell what the 5 wire ( orange) does ? That's all I think I need all the rest of the wires are labeled with a few exceptions and the wires that are not are easy...
Part number KEDU ZH-A
Hey guys I am changing out the clunkie toggle forward /off/ reverse switch with the rotary style for a few reasons 1 it has worn out and is not working properly and 2 when it was working it was hard...
Still available? Price??
I need help with my wiring on this Cj0618 mini lathe . The forward / off / reverse switch became too worn and starting giving me issues so I decided to change it out with the type that comes on a...
Wonderful yes this is perfect to start with thank you
Yes thank you any notes or suggestions would be appreciated and I agree 100 percent with the spindle the electronics are a bit out of date on these type/style "mini lathes ". I am looking forward to...
Im just now coming across this thread . It is 7 years old but I sure could use some of your ideas would you be interested in sharing /selling your plans for the conversion like drawings , blueprints...
Thanks anyway
Hey Peter ,
Do you mind sharing the drawings / prints you made this from I am doing a little research and I am having to teach a few newbies on machining and theory I would like them to try and make...
Did u try using open pocket ? Or y not just draw the toolpath that u want the tool to take