You can try lowering the percentage. Usually the higher the percentage the more it wants to foam but they also sell anti-foaming additives. What material do you cut?
Type: Posts; User: ERUS
You can try lowering the percentage. Usually the higher the percentage the more it wants to foam but they also sell anti-foaming additives. What material do you cut?
Try it at 300 rpm with a really slow feed, or 50 rpm if you can. The slower the rpm the better.
I cant get G93 active either. This is the best I can get from the code.
G0 G17 G20 G40 G80 G90
G49 G53 Z0.
(CONTOUR)
(COMPENSATION TYPE - WEAR COMP)
M08
M21
T239 M6 ( 1/2 FLAT ENDMILL)
M22...
On the Parameters tab, left window towards the bottom. There should be a pull down menu labeled Axis Control.
On Rotary Axis Control select Axis Substitution. It gives you two choices substitute...
Try Mitsubishi inserts. VP10RT is the grade we used to cut Inconel. I would stay with inserts in the S group for heat resistant alloys.
We made a tight tolerance bushings on a ST10 and the...
I forgot one.
Surface Rough - Restmill
There are multiple ways to do it now depending on what you are trying to do.
Pocket - Remachining
Surface Finish - Leftover
Optirough
tldia$
fmt "TOOL" 4 tnote #Note format
fmt "D" 4 toffnote #Note format
fmt "H" 4 tlngnote #Note format #jgp was "L"
fmt "dia" 1 tldia$ #Note...
You have to be more specific.
There really isn't anything in the post regarding the tool diameter. The toolpaths and geometry for the toolpaths are all set when you program a toolpath with a...
From what I can tell it looks like it is trying to do a single point.
The Lathe Toolpath you want is Drill. Try to change the tool library to LTAPS.tooldb. In drill cycle parameters there should...
This is what I have done. It works for OD & ID threads. It adds time to the machining cycle, but it takes time away from having to do secondary operations.
I cut the threads to size. Then I run a...
Moly is pretty abrasive. I have run a few parts made from it. I don't know that you will be able to use a tap. I wasn't able to get more than one or two holes before that tap wore out and seized in...
I'm not able to see the attachment.
Add the code at the beginning G12.1. Polar Interpolation. G12.1 turns it on and G13.1 turns it off.
The way the code is being posted is correct. The machine takes the Y values and turns it into a...
These work better. They max out at 2.5 x D.
The tools I'm referencing are on pages 1 - 8.
https://www.vargususa.com/portals/0/Docs/catalogs/eng/vardex-catalog.pdf
You don't have 0 look ahead. I forget the exact amount but I believe pre-1999 its around 30 lines or something like that.
For drip feeding if you keep your feedrates at or below 100 ipm you...
There is no way 15 ipm will work with a .3mm drill bit.
Max out the rpm and try a 0.0001" to 0.0002" chip load. At 15k rpm that puts you at a feedrate of 3 to 6 ipm. I would stay towards the...
I have mostly done 718.
My experience is the sfm has to be really low. like 50 - 150. Can't do huge depth of cuts. Inserts with a neutral rake will last longer preferable the harder grades.
On the bottom left underneath the toolpath tree there are a few buttons. Levels, planes, toolpath, solid. Select planes. For a haas lathe the plane is lathe upper left. Right click on the corret...
What version of mastercam are you using?
Try this.
The rotary diameter is the diameter of your part.
Use the Planes.
For your default plane set the work offset to manual and 0. Duplicate the plane, move your origin to where you want for G55 and set the work offset to 1.
In the Parameters...
+\- 0.0004 is a lot to ask from a drill bit.
I can't find a drill bit in that range of specifications. The best I can find is a .1705 reamer. MSC part # 03371234, M.A. Ford, carbide.
Best of...
If you can find a 2 or 3 flute endmill it would work better.
I would break the depth of cut in half and do .75 at a time with HSM. 1.5" might be too much for one go at it. I usually do a 30 -...
I believe you want G10. I have used it on a ST30-SSY successfully. This won't work on the HAAS Mills, the code is slightly different.
For Lathe:
G10 L2 P1 W-?
L2 - Is for G54 - G59
P1 -...
A lot of different ways to do the same thing. Stick font works wells for simple engraving. Like the previous poster said I use a contour tool path with cutter comp set to off and it will ride the...
You can go as slow as you want as long as the machine has the torque to do it. There really is not a upper or lower limit with aluminum and carbide tools. At the upper end the problem becomes being...
I don't know if this will work in your application. I have had success saving the stock as a separate STL file, and using the STL to define the stock. Run the program in Verify up to the point that...
I'm going to say the problem is the single flute cutter. Try a 2 or 3 flute with your feeds and speeds. Single flute end-mills are mostly for routers and\or cutting plastic.
5/16" isnt that small as far as threaded holes go.
Climb milling gives you a better finish. Bottom to top for a right hand thread.
For a 5/16-18 you have about 0.03" of thread depth per side....