write this programme in your old machine
G50 S1000
G96 S400 M3
G50 x8.00 z5.00
GO X4.00 Z1.00
GO Z.1
G90 X3.9 Z-1.00 F.01
3.8
3.7
Type: Posts; User: Indmach
write this programme in your old machine
G50 S1000
G96 S400 M3
G50 x8.00 z5.00
GO X4.00 Z1.00
GO Z.1
G90 X3.9 Z-1.00 F.01
3.8
3.7
send me an email I will send you a pdf file for all the Fanuc OM C parameter
I have same problem the power supply board did you get y03 alarm what kind of display on the drive it should be set to 0/ 1 / 2 and power supply should be at 3.
on the tool changer there is a stwitch you have to turn it on
Fanuc 11 control
When I turn on the machine it does not show the screen numbers but it show a horzotical lines but If I wait and shut the machine couple of times than its fine what it could be...
I have acroloc M15 machine
you have to do it
G28 Z1.00 and it will go home
Than call tool
T12 or what ever you need
m19 doesn't work on these old machine and
if your spindle is not...
sorry G96 not G76
Hi Guys
I have Daewoo puma 10 cnc lathe with fanuc 6t control I have figure out why there is a field loss on these dc drives.
1st check the semi conductor fuses
2nd check all the fuses on the...
It might be your cover they are giving load to the ball screws
it might be your gibbs are loose or too tight and they are giving errors to Y axis servo
check the limit swithes make sure there are...
I had a little smash on Z axis on daewoo puma 6 m control now I canot get away with 420 or 421 alaram machine worked fine
I use it every day just keep it clean if not it will work against you its a good machine for basic small detail work not for heavy milling fast production can;t beat the price though
First you home the machine make sure both x and Z is at home position.
Make both screen 0.00 if don't know press x and hit orgin and press z and hit orgin now do same with U and W.
make sure that...