Hello all,
I have a problem with a Trumpf Trumatic 200 from 1994. The machine has sat for over a year and now after turning on I replaced de batteries , one 4.5 v for the RAM and the other 3.6v in...
Type: Posts; User: viorel23cnc
Hello all,
I have a problem with a Trumpf Trumatic 200 from 1994. The machine has sat for over a year and now after turning on I replaced de batteries , one 4.5 v for the RAM and the other 3.6v in...
Hello,
The S stands for speed, it has a faster tool changer than the standart model and higher rapids but I am not sure about the last. The W was the nex generation of machines with the 532...
I still have the wiring diagrams from my machine, but they won t help you since every machine tool builder has a diferent one. Mine is a Sachman RP3. I have replaced the Fidia F1 copymill controler...
Hi all,
After a month of working on a dead Mori Seiki SL 3H with Fanuc 10TF , I finally got it running. I bought it defective so no high expectation where there. I had to buy 2 defective memory...
Hello ,
Every time after power up and axis references my machines loses about 6 mm in the x axis , meaning that if I attend a tool change the machine has a default position of X - 500.mm for the...
Thanks , will try.
The door lock switches can only be bypassed by altering the connections in the electrical cabinet.
Hy,
It means that the linear scale is dirty.
Hello,
The problem is with the post processor. For helical milling the machine accepts "multi turn" arcs. This is an example for a 100 mm radius circle milled with a 20 mm diameter mill:
%PM...
Hello,
I am searching for a Heidenhain ROD 462.018 1024 / S.NR.3 709 545 B / L4 rotary encoder.
Thank you
Hello ,
I would like to buy a Heidenhain ROD 462.018 1024 / S.NR.3 709 545 B / L4 for my Maho 1600 , the original broke so I can 't use the tool changer. If anyone has one for sale in Europe let...
Hello,
I am having a problem with my VK 45 II with seicos M3 controller. It started a couple of weeks ago showing randomly NUMC board error on a daily basis both when the machine was running a...
You use BTR MODE for long programs? In my opinion the maximum baud rate for this old machines is 4800. I use EdgeCam for my machine with a special post processor that I modified for the vertical...
Hello,
I know is very late but I can help you with some parameters. I bought one sl 3h with fanuc 10tf and managed to fix it. Still can't get the measure arm to work but all the rest is functional.
It is not the CPU, normally the 800 e2 is faster than the 600 e. Probably some parameter settings are bad.
Try this constants, but first save your original via RS232 or write them on paper.
Regarding the cube problem check backlash on X and Y .
Hello,
How do I adjust the backlash on VK 45 2 with seicos M3 controller? I noticed that the Y axis has 0.06 mm backlash. The manuals I have don't show the procedure or how to interpret the...
What error is showing?
The Maho mh 600 e has a gearbox for speeds. So you ca only imput fix speeds like S 500 , S630 .
Thanks a lot,
My email is [email protected]
Viorel
Hello all,
I have a Hitachi seiki VK45 II with seicos M3 controller. Machine stop working a month ago , it displayed SPHC board error,no program to load. The machine only booted up in dos mode. So...
Hello,
You can set the size of the BTR memory in the parameters. It is usaly a small value. I don t know exactly the number of this parameter but you can check by pressing the CONSTANT MEM button...
Hello ,
I have an old Mori Seiki Sl 3 with Fanuc 10TE F controller. It sat for over a year until I managed to get it fix. Now I have the parameters list that came with the lathe but not the PMC...
Are your constants ok? Is the table all the way down?
If the limit switches are clear than you should know that there is a technique for powering one the hydraulics. Firs if the machine has sat over night , press the hydraulic switch for a couple of...
Hello everybody,
I recently fixed an old Mori Seiki SL3H with Fanuc 10Te F control that I bought defective. The previous owner gave a paper copy of the parameters but not of the PMC data, counters...
Thank you very much Nader!
My email is [email protected]. Please send me all you can.
Regards
Viorel
Hello,
Since last couple of days my Fidia F1.0191 machine has the same problem. It loses instantly the PLC program after power off. I am having an engineer coming next week to check it. I will let...
You probably have something more serious with your machine and should consider getting a service team. But depending on your country it may not be worth the money. Before I worked with a Maho 1600 S...