457378
Type: Posts; User: wojtekthx
yes thats works with this procedure diagnostic,i change diagnostic parameter
but system wont index turret but no power on relays and valves solenoid
457374
457376
ok let you know tommorow
machine works i change 2 eproms for another and change mem card for another
now read pmc and show ladder
axis works,spindle works but i have probelm with turret maybe that why becouse input...
if you need parameters for puma 6s fanuc otc with 12 tools turrent i can help
you solved the problem ?
Doosan said cant help machine is too old
456913
456915
456917
yes THERE IS 2 EPROMS oe1 AND oe2 but looke like not read this eproms
www.zapodaj.net/2a842194a341d.jpg.html
www.zapodaj.net/60f5d316bf06c.jpg.html
www.zapodaj.net/b74888758ec0b.jpg.html
i have parameter from similar machine,i load everything from similar machine...
i receive parameters and pmc parameters for similar machine 8s i reload but still have problem machine not works
when i turn on machine shows
PLC loading data
1 load from IO
3 run
4 run...
hi please help need parameters for lathe Daewoo Puma 8s 1995 year Fanuc OTC turret 10 tools
please helps
hi
I have a problem with the Fanuc 21T cnc lathe
undulating spindle revolutions above 2000 rpm
i replaced the encoder, belts and still the same
to 2000rpm is ok above the spindle revolutions...
hello need PLC NC and Alarms for lathe cnc Hwacheon Cutex 160 with C axis and driven tools
hello i have problem with Deckel Maho 60T with magasin TNC 426/430
machine not changing tools with magasin but only manual changing
please help how to activate automatic changing tools from magasin...
please help Mazak VTC20B control T plus
when issuing a command to change a tool
, when he puts the tool down and needs to take another tool, the magazine will move a little and show error 212...
will try to send the disk to the data recovery lab
hi Mazak lathe model: QTN200M Nexus Control Fusion 640T
hard drive dead,need disk image becouse my disc is damage(mechanically damaged disk)
I only have a diskette with backup for this machine
...
need disc image
MAZAK 200M NEXUS 640T
hi
i have problem with lathe Mazak
control nexus 640T
when turn on machine -hard drive is faulty and not start,just stay NON SYSTEM DISC OR DISC ERROR
REPLACE AND STRIKE ANY KEY WHEN READY
...
hi
i need need electrical schematic diagram scan
Control Fanuc 21iT
machine Cincinnati hawk
i can pay for sending me scan by paypal
hi
i have problem with Hurco ,sometimes works 1 day ,sometimes works 5 days,sometime works couple hours ,
today i turn on machine works couple hours and receive on the display servo Y faulty on the...
hello I have a problem with Mazak QT10 on Mazatrol T plus
the battery is dead
I replaced the batteries and turned on the machine, only displays 1MCP and nothing works
please help me how to do...
do you resolve problem with ps alarm ?
if you need manual and diagram let me know
hi guys
I have a problem with the MC010 Fanuc OM-A without a ladder
Axes work, spindle works (M3 AND M4 with S works good), m19 works , but when I give M6 T... then I have error PS 581 servo...
Hi i have problem with my DMUTNC426/430
he monitor has vertical lines
synchronization is OK, please help me what can be damaged
I've attached another monitor directly to the cabinet and it's the...
hello please help with CNC VMC please check picture becouse machine show axis like Z Y Y Y Y ,why its like this i cant move any axis,hydraulic not start,no errors on the machine
on the manual is OK...
Hello
I need procedure to changing language in my Hyundai hit 8s control Sinumerik 840C