Robotic and automation > Workpiece and tool handling > Handling of workpieces

Clamping devices with integrated, intelligent measurement technology
Chucks and mandrels with IQ take over the monitoring of production and make work processes easier. They make the transition to Industry 4.0, digitalization and IoT very easy.
Many different measurements and monitoring are possible thanks to the integrated sensor technology. The measurement data is sent directly to the machine controller and evaluated via contactless data and energy transmission. The control system performs a...

Robotic and automation > Workpiece and tool handling > Handling of workpieces

DockLock AC – the zero-point clamping system for automated production
Do you have a shortage of personnel, but need to process your orders, ideally 24/7? Then the DockLock AC zero-point clamping system in hydraulic or pneumatic design for automated fixture changes is perfect for you. With the quick-change clamping device system for the stationary area, you can change your clamping device automatically in two minutes. And with a repeat accuracy of ≤ 0.005 mm without alignment.
The de...

Robotic and automation > Workpiece and tool handling > Handling of workpieces

centroteX AC interface for the automated change of pre-loaded chucks and mandrels
Change parts can be preloaded on the machine or separately outside the machine
can be used for machines with horizontal or vertical rotating spindle as well as stationary [BAZ, measuring machine, …]
Clamping center retraction via bayonet mechanism by means of mechanical actuator [e.g. screwing tool]

With our new AC [automated change] line, everything runs automatically!
We can rightly claim that we...

Robotic and automation > Workpiece and tool handling > Handling of workpieces

Automated clamping head and workpiece stop change


Standardized, cost-effective automation components that have been tried and tested over decades and can be used by the automation provider
Operator-free r&d and production of different clamping diameters and chuck depths
robust mechanics ensure smooth automated set-up processes using a robot or gantry
available in TOPlus and SPANNTOP versions
can also be used with machining centers and vertical lathes

Did you know that the classic manu...