Hi , i am runnin 2 pair of Emco 65 TT, and some times in different program the machine just stop producing without any alarm.
In 2 channels the machine stop at WAIT and that is ok but one channel, usually channel 3, just stops reading.
It can be in an G0 move, Tool change, STOPRE, G4 F1. and its no alarm at all!
The program i am running today worked fine last time but now it kan stop after 3 pieces or 170 pieces. usually the same place , but i am altering the code with G4 and other lines just to try something!!!!
no alarm, no messegades.
As the picture shows it stops in a toolchange in channel 3.

//Stefan