G200.3/ G220

The INDEX G200. Flexible turning and milling - as productive as automatic turning.
The next generation of the turn-mill center with more performance on the smallest footprint.

Spindle passage with 65 mm
165 mm chuck diameter
660 mm turning length

- Up to 3 tool carriers with Y-axis on main spindle and counter spindle
can be used
- Simultaneous machining with up to 4 tools at the same time
- Powerful and dynamic milling spindle (360 degree B-axis, max.
7,200 min-1, 22 kW & 52 Nm)
- Economical complete machining of workpieces of both
bar stock as well as chuck parts
- Incomparably large degrees of freedom in the spacious work area designed for turning
milling with up to 660 mm turning length
- Very good ergonomics for short set-up times
- Small footprint and high power density

Translated with DeepL

The G300/ G320 turning/milling centers for high-performance machining of medium-sized workpieces.
Turning and milling in new dimensions.

Spindle diameter with 102 mm
250 mm chuck diameter
1400 mm turning length

- Identical main and counter spindle with spindle passage Ø 102 mm
- Chuck up to maximum Ø 250 mm (Ø 315 mm)
- 3 tool carriers for up to 141 tools
- Powerful motorized milling spindle with proven Y/B quill kinematics for
complex 5-axis milling operations (G320)
- Sophisticated work area concept for turning lengths up to 1,400 mm and
variable machining possibilities
- High thermal and mechanical stability
- High dynamics (rapid traverses up to 50 m/min)
- Mechanical engineering "Made in Germany

Translated with DeepL

The innovative G400/ G420 turning/milling center-for high-performance complete machining of large workpieces.
Turning and milling in new dimensions.

Spindle passage with 120 mm
400 mm chuck diameter
1,000 Nm Torque
1,600 / 2,300 mm turning length

- Identical main and counter spindle with spindle passage Ø 120 mm
- Chuck Ø 400 mm
- Tool storage for up to 139 tools (INDEX G420)
- Sophisticated work area concept for turning lengths up to 1,600 mm / 2,300
mm and variable machining possibilities
- High thermal and mechanical stability
- High dynamics (rapid traverses up to 50 m/min)
- Chip conveyor can be used on the left and right

Translated with DeepL

The innovative G500/ G520 turning/milling center - for high-performance complete machining of large workpieces.
Turning and milling in new dimensions.

Spindle passage with 120 mm
500 mm chuck diameter
2,000 Nm Torque
1,600 / 2,300 mm turning length

- Identical main and counter spindle with spindle passage Ø 120 mm
- Chuck Ø 500 mm
- Tool storage for up to 139 tools (INDEX G520)
- Sophisticated work area concept for turning lengths up to
1,600 mm / 2,300 mm and variable machining possibilities
- High thermal and mechanical stability
- High dynamics (rapid traverses up to 50 m/min)

Translated with DeepL

Turn-mill center R200 - simply convincing.
Increased productivity through two independent subsystems with full 5-axis capability.

Spindle opening with 65 mm
5,000 min-1 Speed
24 kW Power max.
190 Nm Torque max.

- 5-axis machining on workpiece front and rear side enables an
extremely large variety of parts
- A total of 12 fixed turning tools for particularly high rigidity
and cutting performance
- High metal removal rate due to powerful motorized milling spindles with
18,000 rpm
- Best damping and guiding characteristics of the milling spindles has a
better workpiece quality and extended tool service life
result
- Outstanding dynamics thanks to high rapid traverse rates and acceleration values
- Already included: The operating system iXpanel - iX4.0 with 18.5" touch-
screen based on Siemens S840D sl

Translated with DeepL

Turn-mill center R300 - a new dimension.
5-axis milling and turning in a new dimension.

Spindle passage with 102 mm
3,500 min-1 Speed max.
52 kW Power max.
690 Nm Torque max.

- Up to 140 tools (HSK-T63) with 6 seconds chip-to-chip time
change - thus shortening non-productive times on both milling spindles
- Two full 5-axis systems in one turning/milling center
- Extensive automation options - adapted to the
individual customer requirements
- X travels of up to 780 mm

Translated with DeepL

The TRAUB TNX200/TNX220 is an innovative turn-mill center in a class of its own.
For small to medium-sized workpieces.

Spindle passage with 76 mm
230 mm chuck diameter
207 Nm torque
900 mm turning length

- Identical main and counter spindle with spindle passage Ø 76 mm
- Chuck up to maximum Ø 230 mm
- 3 tool carriers for up to 169 tools
- Powerful motorized milling spindle with proven Y/B quill kinematics for
complex 5-axis milling operations (G220)
- Sophisticated work area concept for turning lengths up to 900 mm and
variable machining possibilities
- High thermal and mechanical stability
- High dynamics (rapid traverses up to 50 m/min)
- High set-up friendliness
- Engineering excellence "Made in Germany

Translated with DeepL

CNC Turning and Milling Center - Passion for High Performance.
The TRAUB TNX65 sets new standards for high-performance machining.

Spindle clearance with max. 65 mm
175 mm max. chuck diameter
650 mm turning length
Milling unit or turret selectable

- Simultaneous, independent working with up to 4 tool carriers
- Quadruple function symmetry, i.e. 4 identical turrets with independent
Y-axis, with the same through-feed spaces and the same number of
tool stations '
- Free assignment of tool carriers to both spindles
- Optimum cutting performance due to powerful drives on main and
counter spindle
- Powerful tool drives on all turrets for complete machining
- Patented toolholder positioning saves time-consuming adjustment of axial tools
of axial tools
- Generous and freely accessible working area

Translated with DeepL