Ball end mill for roughing and finishing with effectively 2 cutting edges on the circumference.
Application areas are the form milling, chambering, spiral interpolation and the groove milling, as well as the application of concave radii. Due to the different adaptation possibilities, even large cavities can be machined without any problems.
The spherical copy mills are available as shank mills with clamping shank according to DIN1835-B (Weldon), as well as according to DIN1835-A (smooth shank) in the diameter range of 12 - 32mm, as well as screw-in mills (compatible with many systems on the market) in the diameter range 12 - 32mm
In these spherical copy mills are effectively 2-edged, asymmetrical indexable inserts used. These are precision sintered with positive chip groove and have a rounded cutting edge. The inserts are – provided with different radii depending on the type –. The inserts are available in three different coatings and thus allow the processing of almost all common materials.
Translated with DeepL
These tangential tools are characterized by a very stable design and extremely quiet and machine-friendly milling behavior, with maximum productivity.
A positive rake angle ensures machine-friendly milling, the positive axial adjustment for a soft cutting behavior.
The tools are available as corner milling cutters or multi-tooth milling cutters.
Ground as well as directly pressed inserts are available, so this program can be used for different applications. The inserts have effectively 4 cutting edges and allow a feed ap of up to 12mm. A wide finishing plate is also available.
Translated with DeepL
Type B27 tangential tools for maximum productivity and machine-friendly operation.
The new corner and face milling program convinces by a quiet and machine-friendly milling behavior with simultaneous highest productivity and precision. The area of application ranges from corner and face milling to full grooves and circumferences of almost all common materials.
The soft and machine-friendly machining is made possible by the very positive geometry design, a positive rake angle and a positive axial angle of attack. The tangential mounting position ensures an enormously high process reliability.
The indexable inserts are effectively 4-bladed and allow a cutting depth ap of up to 9mm
The program includes corner plug-in mills and 75-degree face plug-in mills, as well as multi-tooth mills as plug-in mills and as shank mills.
All tools are designed with holes for internal coolant supply.
Translated with DeepL
The new corner and face milling program of the type B29 impresses with its quiet and machine-friendly milling behavior combined with maximum productivity and long tool life. The field of application ranges from corner and face milling to full grooves and circumferences of almost all common materials.
The smooth and machine-friendly cutting process is made possible by a positive rake angle and a positive axial angle of attack. At the same time, the integrated drag chamfer produces very good surfaces.
The indexable inserts are effectively 4-fluted and allow a cutting depth ap of up to 8mm.
The program includes corner plug-in mills according to DIN 8030-A, in normal and close pitch, as well as shank mills with clamping shank according to DIN 1835-B. In addition, multi-tooth mills with clamping shank according to DIN 1835-B are available.
Translated with DeepL
We use cookies to optimize our website for you and to be able to improve it continuously. By clicking the "Accept" button, you expressly agree to the use of cookies. For further information on cookies, please refer to our privacy policy.