The entire circumference of the milled profile can be scanned without the workpiece having to be unclamped from the machine. After the measuring cut, the forming tools are automatically corrected so that, when it comes to the finish cut, machining qualities are achieved which are very close to the grinding quality.
The scan can be shown on the display itself as a graphical output. Easy calibration of the tool correction during the run-in process and periodic shape inspection in unmanned series production ensure excellent machining quality. Scanning measurement is performed using the BLUM measuring probe. Above all, the early detection of errors, maximum of precision, safety and the minimization of the service life are advantages of the BLUM probe.
With this innovative method of rotor scanning one is able to identify what is being produced before the finish cut is made on a valuable workpiece. Thus, one can be sure that the machining operation is correct.
Austria 
