Indexable inserts for grooving and parting

The power and strength is where it needs to be – times two. WhizCut has re-invented the parting off insert for the future: WhizTwin is a bold new insert that helps reduce waste material and has a stability that is: truly cutting edge. 

The patent pending design of WhizTwin generates a cutting edge stronger than any other and a stability not seen before. The strength and increased stability of the cutting edge is maximized with two cutting edges at the front. This lets the toolholder be clamped in a more stable position with a shorter overhang from the toolholder plate - reducing instability and vibrations which are the main challenges when parting off. Less material waste – less costs. The narrow insert allows you to lower your production cost as you save material using it. Removing less bar material is great for you and also for the environment. It’s a win win – with WhizTwin. 

Range benefits

• More stability, less vibrations: with two cutting edges at the front. The holder can be clamped closer to the tool plate.
• Longer tool life: thanks to the stability of the insert and cutting edge.
• Control those chips: with a choice of four different chip control and cutting rakes to optimize performance for most materials.
• Save material and barstock: as the WhizTwin insert is more stable than ordinary parting off inserts, it is possible to use a more narrow part off.
• Full range and same inserts for right and left: The same insert can be used in a right hand and left hand holder. WhizTwin offers parting off/grooving tools with choices from width of 0,3 mm.
• New carbide grade 7: is an outstanding carbide grade that is extremely hard and tough. Available in all five grades: 7M, F7, B7, T7, ND7. 

WhizTwin, double it, and it's a win win!

Have the cutting edge your way. WhizGroove inserts have four precision ground cutting edges and they come in four different shapes: sharp corners, corner radius, full radius and slightly honed cutting edges. It is a great combination of precision, stability and low cost per cutting edge. 

Perform excellently and eliminate variation in machined parts. Increase your productivity with WhizGroove: precision ground inserts with four cutting edges. WhizGroove was explicitly designed to manage tight tolerance production - down to the decimal and achieve consistent quality with +/- 0,01mm tolerance. WhizCut offers a standard cutting rake of 12 degrees.

Range benefits
• Winning combo: of precise geometries and four sharp cutting edges.
• Precision ground: all inserts are precision ground on all four edges.
• Your choice: WhizGroove comes with sharp corners, radius, and full radius.
• Mix it and fix it: operate WhizGroove together with WhizFix toolholder system and index the inserts in 15 seconds.
• Improve productivity: with enhanced chip control. We recommend using WhizHip holders, feeding the coolant through the holder.

WhizGroove - for tight tolerances!