Sheet-metal separating permanent magnets

Applications

- Button magnets, through bore,
divided adhesive area, material
AlNiCo; max. admissible temperature 450°C
- Pot magnets Material: AlNiCo
with thread; max. admissible
temperature 450°C
- U-magnets: Material AlNiCo;
max. temperature 450°C

The clamping magnets SPM belong to useful accessories for clamping of small parts.


Applications

- Ideal for grinding and electric discharge machining, measuring and testing jobs
- Small magnetic workpieces from 0.5 mm can be clamped.


Features

- Magnetizable on all four longitudinal sides (SPM 2 L, SPM 2)
- Short payback period
- Universally applicable
- Absolutely water-proof
- Switchable on and off by pivoted lever
- All four sides are regrindable (SPM 2 L, SPM 2)

Cylindrical gripper magnets made from magnetic steel, with galvanized case.


Applications

- 001 AlNiCo: Material: AlNiCo fit
tolerance h6, max. admissible temperature 450° C
- 100 AlNiCo: Material: AlNiCo
without fit tolerance, max. admissible temperature 450° C

Cylindrical gripper magnets made of high-energy magnetic material


Applications

- 600 Co: Material Cobalt-Samarium;
fit tolerance h6; max.
admissible temperature 200°C;
brass case
- 100 Ne: Material Neodymium;
fit tolerance h6; max. admissible
temperature 80°C;
brass case

Flat gripper magnet with galvanized case, with threaded bush.


Applications

- 500 Fe: Material Ferrit; max.
admissible temperature 200°C
- 500 Co: Material cobalt-samarium;
max. admissible temperature 200°C
- 500 Ne: Material Neodymium;
max. admissible temperature 80°C;

Flat gripper magnet with galvanized case, without threaded bush.


Applications

- 500 Fe: Material Ferrit; max.
admissible temperature 200°C
- 500 Co: Material cobalt-samarium;
max. admissible temperature 200°C
- 500 Ne: Material Neodymium;
max. admissible temperature 80°C;

Flat adhesive magnet made from magnetic steel, painted / galvanized case.


Applications

- DMAG: Material Ferrit; max.
admissible temperature 200°C,
with hook
- 20 Fe: Material Ferrit; max. admissible
temperature 200°C, with
stud bolt

Flat adhesive magnets made of magnetic steel, with a galvanized case.

The Magmount can be used as a magnetic holder, for example for stands or fixtures.

Applications

- OMAG:Material Ferrit, plastic-
coated
- GMAG:Material Ferrit, white
painted

The V-shape magnetic prisms are employed for grinding and electric discharge jobs as well as useful helpers in metrology rooms when round and complex work pieces are to be safety and precisely clamped.


features

- Four magnetic clamping surfaces (upper, lower and lateral surfaces)
- Switchable on and off
- Can be rapidly and easily placed.
- Also deliverable as match-ground in pairs


applications

- For holding of cylindrical and complex work pieces
- Ideal for grinding and electric discharge machining tasks.

The Magwheel is a rollable magnetic holder. It offers a powerful connection for drive units on any steel surface that requires flat, vertical or inverted movement.

The permanent clamping magnets MSB are used for clamping of shaped parts and grinding of cemented carbide.


Applications

- For clamping of shaped parts
- For grinding of cemented carbide (type SmCo)


Features

- Permanently magnetic
- Not switchable
- Mechanically machineable

The segmented support modules effect as pole extension with magnetic clamping plates. Due to the machined shapes, complex work pieces can be magnetically clamped. Various working heights can be built-up as well.


Applications

- The magnetic contact surface area between work piece and magnetic clamping plate can be
enlarged with non-machined and machined segmented support modules


Features

- The modules can be individually tailored to the work requirements
- Match-ground in pairs
- Can be used both horizontally and vertically