Hello,
in the schematic - if I didn't see wrong - the coil of relè for enable, has 3 wires. I have never seen a relè coil with GND pin, but only + and - connected to activation switch.
Where am I...
Type: Posts; User: leomonti
Hello,
in the schematic - if I didn't see wrong - the coil of relè for enable, has 3 wires. I have never seen a relè coil with GND pin, but only + and - connected to activation switch.
Where am I...
First of all, thank you for fast reply!
For Lathe: facing, profile with single or multiple diameters, boring, fillet, arc (sphere), grove, thread, taper internal/external
For Milling: pocket,...
I use Planet Cnc hardware and TNG for both the milling machines and the lathe, and I am satisfied with them. They are certainly more powerful than I can exploit them.
However, I miss - for both...
Thank you for reply.
Could I have other problems with the beta version, or can I install it peacefully?
Hello,
I've installed the last upgrade of TNG which include the diameter mode on X axis display for lathe type machine.
But I'm not able to see the same on the display of original wireless MPG....
SOLVED! or any unknown reason, I had to disinstall previous version before installing the new.
Thank you in anyway.
Hello,
when I attempt to install, I receive this message
Same issue. I've to remove the line with "Q" command every time.
Sorry for long time in reply.
Here the picts of Omron label
497092 497094
Hello everyone.
I've built a little keyboard/jog control, with all momentary push button, pot and rotary selector) and saved the espr.txt as above. It works perfectly, except for a strange thing: to...
@toni123: I completely agree. I really miss this feature too.
Any lathe Dro offers diameter/radius switching.
Has anyone found a working solution? I too would like, on TNG, to display the diameter on my lathe dro
No, it's not at all difficult. Far from it. And I wasn't speaking in a personal capacity, since I too modify the scripts also with the help of the friends of this forum. But, I repeat, and sincerely...
Not everyone is able to intervene on the codes and, also for safety reasons, it would be advisable for the program to offer, in the setting, the option to stop the spindle in this condition.
The...
Scorpion TDL: Many thanks! I appreciate so much your time and your help.
Due to an unexpected commitment, I'll be away from my garage for next 2/3 weeks. As soon as possible I'll try and let you...
can anyone help me?
Good morning.
For reasons of space on the milling machine table, I need to mount the fixed probe for measuring the tool length, on a retractable arm, moved by a stepper with belt / pulley...
nobody with the same problem?
Good morning,
on my new CNC milling machine, I use the Mk3 / 9, TNG and closed loop stepper motors with encoder. Everything works perfectly, except the backlash. My Z axis, for several reasons, is...
My question was different. I am not looking for a solution to control a second relay. That's simple enough.
I wanted to know if, using the connection between the controller and the output board...
I would like a reply from the Planet Cnc team.
Thank you in advance.
Good evening. I am setting up a new machine and I have the following doubt. I use TNG with Mk3 / 9 + an original Planet output board, connected via IDC cable. The manual says that the IDC cable and...
Thank you
Good evening everyone. Anyone know if Planet TNG can run macros with parametric programming? If so, where can I find a list of the parameters reserved for the system? (Typically #1000, #1001, etc)...
Ok. Thank you!
With 50ms the situation got worse.
I had to go in the opposite direction and with 200ms refresh rate it works fine.
On Raspberry GUI or in terminal?
Hello everyone,
I wanted to replace, on a CNC controlled lathe with MK3 / 4 and TNG, the Windows 10 PC with a Raspeberry PI 400 (4Gb ram, external Toshiba HD via USB 3.0). After some minor...
I don't saw language option. You can use web page auto translate with Chrome.
I have used, on my amateur/hobby cnc machines, the Colibri controller built by Twintec for many years. Powerful controller/software characterized by great interface, very friendly to use and work. ...