DMF 200|8 (Reference-Nr. 030304)

•  
  Reference number 030304

  Manufacture Year 2020

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Milling machines
• Type of Machine
  Bed milling machines (moving column)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Traveling column machine; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	50000/50000/50000 mm/min
  Rapid traverse longitudinal/transverse/vertical	50/50/50 m/min
  Working area 1
  Longitudinal	2000 mm
  Cross	800 mm
  Vertical	850 mm
  Tool changer
  Type of magazine	Chain
  Number of tools	40
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm

• Specification
  
  

  Swivelhead, B-axis	Controlled NC swivel milling head 15,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12
  	Drive power (100% DC) 16 kW
  	Drive power (40% DC) 21 kW
  	Torque (100% DC) 85 Nm
  Rigid table with integrated rotary axis (centre)	Rigid table with integrated round table d 800 mm // 31.49 in located in the middle of table table load max. 800 kg // 1763 lbs
  	Clamping System HSK-A 63
  	Spindle taper HSK-A 63
  	Speed range 20 - 15000 rpm
  	Torque (40% DC) 111 Nm
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Spindle speed 15,000 rpm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Infrared measuring probe TS460	Infrared touch probe make Heidenhain TS 460
  3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
  Tool laser measuring Blum	Laser tool measuring Blum LC50 DIGILOG Measurement of length and diameter Automatic cleaning with external air blast Calibration Tool with tool holder (not with TT 140/160 possible, for pendulum machining, please order 2 pieces)
  Signal lamp 4-colour	Signal lamp, 4 colours
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  proTIME	proTIME Visualisation of remaining runtime, remaining workpieces and the machine state
  Internal Coolant Supply 80bar/980l frequency controlled	Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
  Coolant tempering for internal coolant 980l	Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l)
  Chip flushing for working area	Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included (only available starting internal coolant supply 980l)
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Oil mist separator	Oil and emulsion mist separator mechanical filter system 1600 m³/h
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
  Exhibition design DMF	Chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; exhibition version of cabin roof
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	Laminated glass safety panes for workspace doors

I like it 0