504,278 active members
6,263 visitors online
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMF 260|11 (Reference-Nr. 030269)

Asking price


  • Reference number 030269
    Manufacture Year 2017
    Operation Hours not applicable
  • Metal working machine
  • Milling machines
  • Bed milling machines (moving column)
  • DMG MORI
  • Siemens

  • General
    in travelling column construction NEW DMG MORI Design swivel head (B-axis); Control: CELOS with Siemens 840D sl Operate
    Working area 1
    Longitudinal 2600 mm
    Cross 1100 mm
    Vertical 900 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
    Rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 120
    Max. tool weight 6 Kg
    Max. tool length 300 mm
    Max. tool diameter with occupied adjacent pockets 80 mm
    Max. tool dia. with free neighbouring pockets 130 mm

  • Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    Rigid table with integrated rotary axis (leftside) Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position
    Table surface 3200 x 1100 (Ø 1050) mm
    Slot width 18 mm
    Number of Slots 9
    Rotation speed max.4. Axis 50 rpm
    Distance between T-Slots 100 mm
    Clamping hydraulics,2 circuits,Rigid-/Round table Clamping hydraulic for rigid/integrated round table, 30-240 Bar, 2 circuits
    Removable partition wall DMF260 (Y1100) Partition wall removable for pendulum machining DMF260, 2 working spaces (possible with integrated round table)
    Tool magazine 120 places Tool magazine 120 places HSK-A63 Chain type with double gripper
    Spindle speed 20.000 rpm Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
    Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
    Infrared measuring probe TS 649 Infrared touch probe make Heidenhain TS 649
    Tool laser measuring Blum Laser tool measuring Blum (not with TT 140 possible, for pendulum machining please order 2 pieces)
    Oil mist separator Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Air blast through spindle centre Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
    Inner coolant supply 40Bar/980l Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
    Door drive for working area doors Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Energy meter for Siemens 840 sl OP CELOS Energy meter for 3D control Siemens 840D solutionline Operate with CELOS
    Supports to climp into the working area Supports to climb into the working area Only in combination with electric doordrive! Only with operation mode 4 possible! 1 foldout steps in each door at front side of machine
    NETSERVICE (CELOS) Netservice Qualified support by Internet-based remote diagnostics
    SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
    MESSENGER (CELOS) MESENGER (CELOS) Clear live status of the networked machines

Send request

More machines from DMG MORI Global Marketing GmbH