CMX 1100 V (Reference-Nr. 051039)

•  
  Reference number 051039

  Manufacture Year 2020

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Machining centres
• Type of Machine
  Machining Centers (Vertical)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Vertical Machining Centres; Control: DMG MORI SLIMline® Multi-Touch control
  Characteristics
  Table surface	1400 x 560 mm
  Dimensions (L x W x H)	6,3 x 5,5 x 2,94 m
  Rapid feed X / Y / Z	30/30/30 m/min
  Movement X / Y / Z	1100/560/510 mm
  Spindle taper	HSK-A 63
  Tool Magazine with	60 Positions
  Torque (100% DC)	84 Nm
  Max. torque	121 Nm
  Drive power (40% DC)	20 kW
  Drive power (100% DC)	14,5 kW
  Speed max.	15000 rpm
  Maximum load (table centre)	1000 Kg
  Weight approx.	6050 Kg

• Specification
  
  

  Direct measuring system X,Y,Z	Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
  Production Package 1 with Chip Conveyor	Production Package 1 Option includes: - Internal coolant supply 12 bar; - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheel - Cab
  inlineMASTER® spindle 15.000 rpm	inlineMASTER® spindle 15.000 rpm Spindle speed range 20 to 15.000 rpm Tool Taper HSK-A 63 Power: 20kW (40% DC) / 14,5kW (100% DC) Torque: 121 Nm (40% DC) / 84 Nm (100% DC) bearings oil-air lubrication chiller unit 150 W for main drive (different from st
  Tool Magazine 60 places	Tool Magazine 60 places HSK-A 63 Option includes: - Tool magazine 60 places with double gripper; chain type, servo drive - Tool (Un-) Loading through Magazine Door during AUTO Mode - Tool magazine door - Automatic magazine shutter (instead of bru
  Machine preparation for PH 150	Machine preparation for PH 150 Option includes: - Automatic lift door on right cabin side - Robot interface (DMG MORI Standard) - Hydraulic / pneumatic preparation with 2 hydraulic and 2 pneumatic channels on the machine table (to expand the fixin
  Air coolant internal (through spindle centre)	Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
  Preparation for oil-mist extractor unit	Preparation for Oil-Mist Extractor Unit Option includes only mechanical preparation Opening diameter: D150 mm
  Renishaw Touch Probe-Kit for SIEMENS control	Touch Probe-Kit for SIEMENS control Option includes: - PP40 Touch Probe with optical signal transmission; - OTS Probe for Tool Measurement; - Calibration Tool; - Calibration Ring; - Case for equipment. Direct measuring system recommended
  ATC (Application Tuning Cycle) / Siemens	Technology cycle ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy / surface / speed Operator can set the optimum cutting method simply by selecting either the time priority mode or accuracy priority mode
  Pro Time	PROTime Electronic display Display functions: - Remaining machining time - Remaining parts to be produced - Machine status
  Software option - DXF Import (Siemens)	Software option - DXF Import Possibility to open DXF files directly on the controller in order to extract contour and import it to the program. For SIEMENS control
  DMG MORI Messenger	DMG MORI Messenger Installation kit for the connection of one machine.
  NETservice	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoTconnector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  Special equipment	Spindle taper for HSK-A 63 (incl. adaptation working spindle, tool changer and tool magazine)

I like it 0