NC rotary table (grid plate) | Type of Measuring system Direct measuring system |
| Table surface Ø 1500 x 1250 mm |
| Centre bore 50 mm |
| Maximum load (table centre) 4000 Kg |
Prod. package 40 bar/23 l/min | Production package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 900 l, rotating clear-view window, scraper flight conveyor coolant through spindle centre form AD |
| 4. Axes (swivelling range) 360 x 0,001 degree |
| Clamping grid 50 x 50 mm |
Cabine | Full protection cabin |
Motor spindle 10.000 rpm | Motor spindle 10.000 rpm SK 50 |
Uni. head with controlled B axis SK 50 | Universal milling head with controlled B-axis SK 50 Continuously positioning universal milling head (B-axis) with integrated motor spindle for 5 axes positioning and simultaneous machining. |
| Spindle taper SK 50 DIN 69871 |
| Speed range - 10000 rpm |
| Torque (40% DC) 288 Nm |
| Torque (100% DC) 187 Nm |
| Drive power (40% DC) 44 kW |
| Drive power (100% DC) 32 kW |
| Type of main drive AC |
Tool magazine, shelf, 60 pockets | Tool magazine shelf magazine with 60 magazine pockets SK 50 or optionally chosen spindle taper |
Infrared measuring probe Renishaw | Infrared measuring probe Renishaw MP 10 Version for SK 50 or optionally chosen spindle taper Machine with tool changer The measuring probe is changed out of the tool magazine automatically into the working spindle |
3D-machining, 3D-tool compensation | 3D-machining, 3D-tool compensation with vector to the surface |
Tool measuring in machining area, Blum Laser | Tool measuring in machining area Type Blum Laser automatic withdrawal of the measuring unit in a protected housing tool length and tool diameter measuring horizontal/vertica |
TRANSMIT-Rotary table machining | TRANSMIT-Rotary table machining, Lateral surface transformation |
CompCad compressor function | CompCad compressor function for high-speed machining |
Spray pistol with pump | Spray pistol with pump 1 bar/40 l/min 14.5 psi/10.4 gallon/min (theoretical pump performance) |
Oil and emulsion mist separator | Oil and emulsion mist separator electrostat filter |
Cooling | Cooling by air blast through spindle centre, selection with M function |
Operation mode 4 | Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list |
Special equipment | Deviating/additional scope of delivery: - El. Hand control panel Siemens type B-MPI (instead of el. handwheel) - Special table top for 3R clamping system (mechanically) - Contact-point-related individual wire identification |