NTX 1000 (Reference-Nr. 190065)

•  
  Reference number 190065

  Manufacture Year 2019

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Fanuc
• Description
  
  

  General
  Turning-milling centre; Control: Control F31iB5 with CELOS
  Characteristics
  Swing- Ø, max.	450 mm
  Weight approx.	11500 Kg
  Drive power milling spindle	5,5/9,5 kW
  Drive power main spindle	15 kW
  Number of Toolmagazine positions	38
  Speed max.	20000 rpm
  Slewability of B-Axis	+/-120 degree
  Movements X / Z / Y	455/800/+-105 mm
  Milling spindle upper side	1
  Input precision of C-axis on Mainspindle	0,001 degree
  Bar diametre	52 mm
  Speed max.	6000 rpm
  Max. Turning Length	800 mm
  Max machining diameter	430 mm
  Dimensions (L x W x H)	4,16 x 2,55 x 2,59 m

• Specification
  
  

  CELOS - ERGOline Touch	CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p
  (Spindle 1) through-spindle hole dia. 73 mm, 5,000min-1 (Bar work capacity dia. 65 mm) (for FANUC)	(Spindle 1) through-spindle hole dia. 73 mm, 5,000min-1 (Bar work capacity dia. 65 mm) Spindle 1 through-spindle hole dia. 73 mm (Bar work capacity dia. 65 mm) This specification changes the spindle 1 to the spindle unit with the bar work capacity dia. 6
  Standard spindle (spindle 2) 11/ 7.5 kW, 6,000min-1 (for FANUC)	Standard spindle (spindle 2) 11/ 7.5 kW, 6,000min-1
  (Spindle 1) KITAGAWA 8in. Hollow Chuck BB208A621	(Spindle 1) KITAGAWA 8-inch Hollow Chuck BB208A621 Three-jaw hydraulic chuck manufactured by Kitagawa Iron Works. Chuck outer diameter: Ø 210 mm (dia.8.27 inch.) Through-hole diameter: Ø 66 mm (dia.2.6 inch.) Gripping diameter: Max. Ø 210 mm (dia.
  (Spindle 1) Hollow Cylinder set for KITAGAWA 8in. Hollow Chuck BB208A621 (without chuck body)	(Spindle 1) Hollow Cylinder set for 8 in. chuck
  (Spindle 2) Hollow Cylinder set for KITAGAWA 6in. Hollow Chuck BB206A521 (without chuck body)	(Spindle 2) Hollow Cylinder set for 6 in. chuck
  Chuck foot switch (double) for spindle 1, 2	Chuck foot switch (double) for spindle 1, 2 Chuck opening and closing on spindle 1 and 2 are operated by twin chuck footswitch.
  Tool spindle full indexing specifications (STD)	Tool spindle full indexing specifications (Standard)
  High-speed Turn-mill Spindle, 20,000 min-1, 9/5.5 kW, 49.4 Nm (15%ED)/21.9 Nm (C5/HSK-A50)	High-speed turn-mill spindle, 20,000 min-1, 9/5.5 kW, 49.4 Nm (15%ED/21.9 Nm) compactMASTER 50|400
  10 Station Bolt-Tightened Turret, milling specifications (10,000 min-1, 1.5/1.2 kW, 4.8/2.3 Nm) (Turret 2) (for FANUC)	10 Station Bolt-Tightened Turret, milling specifications (10,000 min-1, 1.5/1.2 kW, 4.8/2.3 Nm) (Turret 2)
  Spindle 2 tailstock specifications	Spindle 2 Tailstock Specification The specification to push a workpiece by the center mounted in the spindle 2 chuck. This allows you to machine the tip of the workpiece. When using spindle 2 as a tailstock, the motor equipped with a brake is installe
  Tool storage capacity 76 tools (Capto C5)	Tool storage capacity 76 tools (Capto C5) An option to increase the tool strage capacity and change the tool holder grip and retention knob.
  Chip conveyor (right discharge, hinge type + drum filter type)	Chip conveyor (right discharge, hinge type + drum filter type) This allows disposal regardless as the type of chips. Long chips are descharged to outside the machine by hinge plates. Chips sandwiched between the hinge plates are also transported and disch
  Mist collector Interface (duct only, dia. 200 mm )	Mist Collector Interface (Duct Only, Dia 200 mm (7.874 in) ) Interface for attaching a mist collector to collect dust and particles and to condense oil mist and smoke generated during the machining process. Includes only the duct outlet from the machine b
  Oil skimmer (Screw type)	Oil Skimmer It removes oil that floats on the surface of coolant in the coolant tank to maintain the coolant quality and inhibit the coolant deterioration. This can reduce the coolant disposal cost. The screw type oil skimmer is adopted, which separate
  Knoll KF110/700 Filter System 7.0 MPa plus 1.5 MPa for Turret II	Knoll KF110/700 Filter system 7.0 MPa - 31 l/min - 5.5kW high pressure coolant pump - vario valve - additional 1.5 MPa 30l/min high pressure coolant pump for turret II - lifting pump 100 l/min - paper filter - 700 l coolant tank with cleaning opening - fl
  Manual in-machine tool presetter (removable type) (Left Spindle) (STD)	Manual In-machine Tool Presetter (Removable Type) (Left Spindle) (STD) It simplifies the complicated setup work at the tool change. The position of the tool nose is measured precisely by just bringing the tool nose into contact with the sensor, and the
  Workpiece unloader (Right Spindle, workpiece receiver type) + Workpiece unloading conveyor+ Workpiece stocker	Workpiece unloader (Right Spindle, workpiece receiver type) + Workpiece unloading conveyor+ Workpiece stocker Max workpiece diameter: 65 mm (2.55 inch.) Max workpiece length: 230 mm (9.05 inch.) Max workpiece mass: 3 kg (6.6 lb.)
  Spindle 2 workpiece ejector	Spindle 2 Workpiece Ejector It is an option for spindle 2 specifications, and ejects a workpiece by pneumatically actuating a shaft inside spindle 2. The end block can be replaced by the customer.
  Interface for Bar feeder (LNS) (multiple)	Bar Feeder Interface (LNS) (multiple) The Bar feeder interface (I/F) is intended for connection to the bar feeder, which achieves higher productivity by the automatic bar stock feed. To install any bar feeder other than the LNS-made, the I/F needs to b
  Eccentric Machining	Excentric Machining This function enables to do eccentric machining on the turning center without special chick or tool. Making a program with guidance saves time for programming. Depending on machining time and feed rate, there is a concern that the l
  Alternating speed	Alternating Speed It can suppress regenerative chattering by fluctuating spindle speed. The cycle is automatically calculated only by setting the fluctuation width in the guidance screen. *Regenerative chatter is created by excitation resulting from t
  gearSKIVING	GearSKIVING This function enables to make a program with guidance and machine helical, internal or external gear using gear skiving tool. Regarding machining possibility including machining accuracy, please contact DMG MORI sales staff *Need to select t
  3D Quick SET	3D quickSET It is technology cycle that measures and offsets automatically geometric tolerance of rotary axes easily on a 5-axis machine using a touch probe and a calibration sphere. When the geometric tolerances that can lead to poor-quality workpiece
  Islands, open pockets	Islands, open pockets Islands - Programming process can be greatly simplified because minimum input operation is required even for the complex machining. Open pockets Definition of open pockets eliminates tool paths with no machining allowance,
  High-speed canned cycle	High-speed canned cycle The screen guidance guide to input the stable cycle argument. One line program can command high-speed cutting. High-speed machining cuts the machining time. The cycle whose high speed machining complicated programming can be do
  Addition of optional block skip (soft key type 2-9)	Addition of optional block skip (soft key type 2-9) When a slash (/) followed by a number (/n(n=2-9)) is specified at the head of a block and the optional block skip switch n on the operating panel is turned on, commands in the block specified by /n c
  Tool offsets 996 sets in total	Tool Offsets 996 Sets in Total 996 sets of tool offset can be registered in total. The offset amounts of tool length, tool diameter and tool position can be registered for each set of tool offset, and up to 996 tools can have the one set of tool offset

I like it 0