508,081 active members
2,255 visitors online
Register for free
Login Register
Metal Work Deutschland Products

Leader of pneumatic components.

Kupplungen Reihe ICS
Compressed air technology, others
Quick-fit Coupling for mould conditioning Series ICS
The mould conditioning coupling was specifically designed to speed up and facilitate the replacement of moulds in injection moulding machines. Rapid mould changeover can be easily obtained by fitting a female body at the end of the pipes conveying the thermoregulating fluid and a male coupling to the moulds. With this configuration, each mould can be connected and disconnected from the thermoregulation circuit rapidly. The presence of a female coupling with a safety valve on the pipework prevents the outflow of fluid when coupling with or releasing from the mould.
Product details Homepage Product request
Compressed Air Quick-Fit Coupling Series IAC
Compressed Air Quick-Fit Coupling Series IAC
Compressed air technology, others
Kupplungen Reihe IAC
Compressed air technology, others
The compressed air quick-fit coupling by Metal Work allows quick replacement of pneumatic equipment (drills, milling machines, screwers and actuators in general) without having to set the line pressure to zero each time. Rapid tool changeover can be easily obtained by fitting a female body on the branch under pressure and the male coupling on the actuator. The presence of a female coupling with a safety valve on the branch under pressure prevents air dispersion during disconnection.
Product details Homepage Product request
Air-Air Pressure Multiplier (Booster)
Luft-Luft Druckverstärker 1
Compressed air technology, others
Metal Work Deutschland GmbH
Compressed air technology, others
The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure.
It is normally used to locally intensify the input pressure of one or more actuators. As it is entirely pneumatic it can be used when electric devices are not recommended.
The booster can be supplied with or without a pressure regulator. It is fitted with check valves that maintain the outlet pressure even when the supply of compressed air is switched off.
This means it is necessary to interrupt the supply and relieve the circuit before intervening on the device in any way.
It is advisable to install a tank after the booster to prevent fluctuations in outlet pressure.
  • Air-air pressure multiplier 1
  • Air-air pressure multiplier 2
Product details Homepage Product request
Pneumatic Logic
Pneumatic Logic
Compressed air technology, Accessories
Metal Work Deutschland GmbH
Compressed air technology, others
Pneumatic Logic
Metal Work logic elements are available with 5 different functions:
OR, AND, NOT, YES, MEMORY.
Main features common to all elements:
- Adaptor for ? bar (DIN EN 50022) integral with the body.
- Built-in pressure indicator.
- Pipe locking system using Ø 4 built-in fittings
Product details Homepage Product request
Proportional precision pressure regulator REGTRONIC series
Proportionaldruckregler
Compressed air conditioning
Metal Work Deutschland GmbH
Compressed air technology, others
Proportional pressure regulators series REGTRONIC have the job of
precisely regulating the pressure in a system, the variables depending
on the input command. Remote control regulators are controlled by
means of an M12x1 cable and connector and can have Volt, mA or
RS232 control. Regulators with a display can be controlled via a cable or
directly using the keys below the display. The pressure value and a series
of information and diagnostics are visible at all times on the graphic
display.
The user-display interface, LEDs and buttons are all on one side.
The programming and reading software is comprehensive, simple and
intuitive. Pressure control takes place in a “closed-loop” with an electronic
precision pressure sensor that measures the downstream pressure, a
control system that compares it with the desired pressure, and two mini
solenoid valves that adjust the pressure to reach the target value.
  • Proportional regulator
Product details Homepage Product request
Precision pressure regulator with high exhaust flow, series GS
Präzisionsdruckregler Reihe GS
Compressed air conditioning
Metal Work Deutschland GmbH
Compressed air technology, others
GS is a series of precision regulators, designed for rapid relief of overpressure and a high flow rate. They feature identical and opposing regulation valves on the inlet and outlet sides. This enables the regulator to behave symmetrically – precise regulation with a high rate of flow both in and out. The pressure setting is virtually insensitive to changes in the upstream pressure (see diagram below), which guarantees accuracy even when the mains pressure fluctuates considerably. A slight escape of air is required for correct operation of the regulator – it must not be considered a defect. The regulator can be fixed using the through holes in the body or a bracket accessory. The body has a 1/8” pressure gauge fitting.
GS regulators are suitable for applications requiring good accuracy in maintaining the pressure and a certain sensitivity in relieving pressure peaks, e.g. to supply low-friction cylinders, reel tensioners and coil winders. Two sizes of compressed air fitting are available: 1/8” and 1/4”.
Three different setting ranges are available: 0 to 2 bar, 0 to 4 bar and 0 to 8 bar.
  • Pressure regulator series GS
Product details Homepage Product request
Digital Pressure Switch
Digital Pressure Switch
Compressed air conditioning
Metal Work Deutschland GmbH
Compressed air technology, others
Digital Pressure Switch
The digital pressure switch allows both the transmission of electrical
pressure signals and the instant display of pressure. Two digital outputs,
which can be set according to the two pressure values reached, are
available.
An analogue output of a voltage proportional to the pressure reading
is also available. The values are clearly displayed on a LED video and
different parameters can be entered from the keypad.
Hysteresis can be adjusted and the unit of measurement for pressure can
be modified.
Two models are available:
Series 600 (historical version), characterised by G1/8” female pneumatic
ports, one at the bottom and one at the back (pressure switch supplied with
bottom port covered with a removable plug); one-colour LED; pre-wired
cable.
Series 640 (the latest version), characterised by R1/8” male pneumatic
ports (taper thread) and M5 female thread inside on the rear side;
two-colour LED displays that can be programmed depending on the
pressure signal; cable with connector. A kit of accessories is provided for
fixing to the top or wall, or to a panel.
Product details Homepage Product request
Pressure Switches
Druckschalter
Compressed air conditioning
Metal Work Deutschland GmbH
Compressed air technology, others
Pressure Switches
This type of pressure switch features a high degree of miniaturisation
and a modern attractive design.
It can be installed in any position and also mounted onto a wall by means
of two transversal holes.
In order to reduce wiring times, it is supplied ready assembled with
a 2-metre electric cable or an M8 connector with a 300-mm cable.
The contact is the switching type, which means it can be normally open
or normally closed.
A knurled push-lock handle is provided for regulation.
  • Pressure switches
Product details Homepage Product request