DMF 200|8 (Reference-Nr. 030305)

•  
  Reference number 030305

  Manufacture Year 2021

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Milling machines
• Type of Machine
  Bed milling machines (moving column)
• Manufacturer
  DMG MORI
• Control
  Heidenhain
• Description
  
  

  General
  Traveling column machine; Control: CELOS with Heidenhain TNC 640
  Technical Data
  Feed rate longitudinal/transverse/vertical	80000/80000/80000 mm/min
  Rapid traverse longitudinal/transverse/vertical	80/80/80 m/min
  Working area 1
  Longitudinal	2000 mm
  Cross	800 mm
  Vertical	850 mm
  Tool changer
  Type of magazine	Chain
  Number of tools	90
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm

• Specification
  
  

  Dynamic package for DMF 200|8 linear	Dynamic package for DMF 200|8 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motor
  Swivelhead, B-axis	Controlled NC swivel milling head (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±120°
  	Clamping System HSK-A 63
  	Spindle taper HSK-A 63
  	Speed range 20 - 20000 rpm
  	Torque (40% DC) 130 Nm
  	Torque (100% DC) 86 Nm
  	Drive power (40% DC) 35 kW
  	Drive power (100% DC) 25 kW
  Rigid table with integrated rotary axis (centre)	Rigid table with integrated round table d 800 mm // 31.49 in located in the middle of table table load max. 800 kg // 1763 lbs
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Spindle speed 20.000 rpm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  Tool magazine 90 places	Tool magazine 90 places SK40/HSK-A63 Chain type with double gripper (option from standard)
  Preparation for NC-sub table 700	Preparation for NC-sub table 700 with direct measuring system in the left working area
  Infrared measuring probe TS460	Infrared touch probe make Heidenhain TS 460
  3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
  Tool measuring Heidenhain TT160	Tool measuring device Heidenhain TT160 Tool length and diameter measurement with cleaning air-blast, Calibration Tool with tool holder (not with Laser possible, for pendulum machining please order 2 pieces)
  Signal lamp 4-colour	Signal lamp, 4 colours
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Internal Coolant Supply 80bar/980l frequency controlled	Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
  Minimum lubrication external	Minimum lubrication external for vertical or swivel head
  Chip flushing for working area	Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included (only available starting internal coolant supply 980l)
  Oil mist separator	Oil and emulsion mist separator mechanical filter system 1600 m³/h
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Safety package for power failure (incl. IPC)	Safety package for power failure: Package for power failure IPC CELOS (for proper shutdown of IPC); Overvoltage limiter, Undervoltage monitoring with fast deceleration control
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Special equipment	Alternating operation/kinematic changeover between integr. rotary table and NC/AT 700

I like it 0