541,797 active members*
3,784 visitors online*
Register for free
Login Register


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMF 260|11 (Reference-Nr. 030276)

Asking price

  • Reference number 030276
    Manufacture Year 2019
    Operation Hours not applicable
  • Metal working machine
  • Milling machines
  • Bed milling machines (moving column)
  • Siemens

  • General
    in travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 8,000 rpm motor spindle with 23.5/13.5 kW // 31.5/18.1 hp (25/100%DC) tool taper SK40 DIN 69871 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate
    Working area 1
    Longitudinal 2600 mm
    Cross 1100 mm
    Vertical 900 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 80000/60000/60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 40/40/40 m/min
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 60
    Max. tool weight 15 Kg
    Max. tool length 500 mm
    Max. tool diameter with occupied adjacent pockets 115 mm
    Max. tool dia. with free neighbouring pockets 160 mm

  • Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    Dynamic package for DMF 260 linear (Y1100) Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag
    Rigid table with integrated rotary axis (leftside) Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position
    Table surface 3200 x 1100 (Ø 1050) mm
    Slot width 18 mm
    Distance between T-Slots 100 mm
    Number of Slots 11
    Rotation speed max.4. Axis 50 rpm
    Clamping hydraulics,2 circuits,Rigid-/Round table Clamping hydraulic for rigid/integrated round table, 30-240 Bar, 2 circuits
    Removable partition wall DMF260 (Y1100) Partition wall removable for pendulum machining DMF260, 2 working spaces (possible with integrated round table)
    Tool magazine 60 places SK50/HSK-A100 Tool magazine 60 places SK50/HSK-A100 Chain type with double gripper
    Mechanical setup station Mechanical setup station SK50/HSK-A100
    Load support for tool magazine Load support for tool magazine SK50/HSK-A100 with 2 pockets at the stairs to magazine
    Spindle speed 20 - 10,000 rpm HSK-A100 Spindle speed 20 - 10,000 rpm HSK-A100 for tool taper according to DIN69893 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% ED) (differently from standard)
    Preparation 3D Quickset Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
    Infrared measuring probe TS460 Infrared touch probe make Heidenhain TS 460
    Tool laser measuring Blum Laser tool measuring Blum (not with TT 140 possible, for pendulum machining please order 2 pieces)
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Air blast through spindle centre Air blast through spindle centre selection with M function maintained air (1 Drop Oil per 8min) (in combination with ICS possible)
    Inner coolant supply 40Bar/980l Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
    Bed flushing Nozzles on backside of machine bed below of the X - lammellar wall and Y-Z-axis frame (only available starting internal coolant supply 980l)
    Door drive for working area doors Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Turning/Milling cycle Turning / milling cycle For the machining of internal and external diameter using spindle orientation
    DMG MORI NETSERVICE DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
    IoT connector DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
    SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
    MESSENGER (CELOS) MESENGER (CELOS) Clear live status of the networked machines

Send request

More products from DMG MORI Global Marketing GmbH