534,848 active members*
3,085 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

NHX6300 (Reference-Nr. 064035)

Asking price


  • Reference number 064035
    Manufacture Year 2020
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining Centers (Horizontal)
  • DMG MORI
  • Fanuc

  • General
    Horizontal machining center Chip conveyor (ejection to the rear) Coolant gun for setup station side Oil skimmer Sludge collecting function inside coolant tank In-machine measuring system (spindle) touch sensor (Renishaw OMP60) + workpiece setter Tool breakage detection system Manual pulse generator (separate type) Full closed loop control (Scale feedback); Control: Control F31iB with CELOS
    Characteristics
    Speed max. -8000 rpm
    Spindle taper BT 50
    Tool Magazine with 60 Positions
    Rapid feed X / Y / Z 60/60/60 m/min
    Movement X / Y / Z 1050/900/1030 mm
    Palett changer with 2 Pallet
    Max. work piece height 1300 mm
    Max. work piece diameter 1050 mm
    Maximum load (table centre) 1500 Kg
    Swivelling range 360 x 0,001 degree
    Table size 630 x 630 mm
    Drive power (100% DC) 45 kW
    Weight approx. 18750 Kg

  • CELOS - ERGOline Touch CELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p
    High-torque spindle 8,000 min-1, 55/ 45 kW High-torque Spindle 8,000 min-1, 55/45 kW High-torque Spindle powerMASTER® High-torque specification for the integrated #50 tapered spindle. Cartridge design for easy maintenance. Lubrication: Oil-air Spindle speed: 35 - 8,000 min-1 Output: 55/45 kW
    Spindle Taper 7/24 Taper #50 (two-face contact)/ Grip MAS Spindle Taper 7/24 Taper #50 (Two-face Contact)/Grip MAS This specification uses the spindle No. 50 7/24 taper (two-face contact) / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.
    Preparation for Center Through-spindle coolant system Center Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life.
    Retention Knob: DMG MORI 90 degrees (7/24 Taper #50) Retention Knob: DMG MORI-specific 90-degree (7/24 Taper #50) The spindle collet applicable to the DMG MORI-specific 90-degree retention knob is installed. *Tool retention knob is not included. *The through-spindle coolant specification requires a dedic
    Full 4th axis rotary table (STD) Full Rotary B-Axis Specifications (Standard Specification) Minimum pallet indexing angle is 0.001 °. It is applicable to the B-axis index machining and simultaneous 4-axis machining. The High torque DD (direct drive) motor enables high-speed and high-p
    Pressure setting for Hydraulic Fixture Interface: 7MPa (STD) Pressure Setting for Auto-Coupler Specification: 7 MPa (1,015 psi) The hydraulic pressure setting for fixture is 7 MPa (1,015 psi). *When changing the pressure setting, please order it as a special specification.
    Tool storage capacity 60 tools (STD) Tool Storage Capacity 60 Tools (Standard)
    Chip conveyor outside machine (rear discharge, drum filter type) (STD) External Chip Conveyor (Rear Discharge, Drum Filter Type) (Standard Specification) The scraper type chip conveyor efficiently discharges chips in the machine into the container (order separately) at the rear of the machine. The drum filter rotates durin
    Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Through-Spindle Coolant System I/F (8 Steps Pressure) (Separate Type) I/F for mounting the high-pressure coolant system (separate type). Supplies the high-pressure coolant to the tool tip from the center of the spindle through the retention knob and the
    Through-spindle coolant/ air (switching specifications) Through-Spindle Coolant / Air (Switching Specifications) Supplies either coolant or air, which can be switched, to the tool tip through a hole in the spindle and tool. It is effective when switching between coolant and air according to machining. Control
    Coolant chiller Coolant Chiller The coolant chiller cools coolant in the coolant tank according to a rise in the machine temperature. Controlling the coolant temperature suppresses the rise in temperature of the workpiece, tool and table and achieves the stable machi
    Rotary window Rotary window The rotary window is fixed inside the window at the machining side door. Glass disc of the rotary window rotates by air drive to remove coolant adhering inside of the window with centrifugal force. -Air drive system -Outer diameter: 239 mm
    Additional Coolant Gun for Machining Side Coolant Gun for Machining Side The coolant gun is mounted on the right side of the machining side door to clean chips adhering to workpieces and fixtures at the setup. Pressing the coolant gun button on the control panel with the front door open act
    In-machine measuring system (spindle) optical signal transmission type touch sensor (RENISHAW, OMP60) + workpiece setter function (STD) In-Machine Measuring System (Spindle) Optical Signal Transmission Type Touch Sensor (Renishaw, OMP60) + Workpiece Setter Function Spindle-mounted touch sensor measures locations on fixture and workpiece.
    In-machine measuring system (table) touch sensor (Magnescale) + tool setter function (tool length + diameter) In-Machine Measurement System (Table) Touch Sensor (Magnescale) + Tool Setter Function (Tool Length + Tool Diameter) The Magnescale touch sensor mounted on the table allows the tool length and diameter measurements and the tool breakage detection. Durin
    10 external M-codes 10 External M-Codes 10 M-codes are added for general purpose use by customers. The terminal blocks are provided for output/completion of the added M-codes. When the M-code is specified, the signal is output to the terminal block relayed to the relay ci
    Voltage of Customer Factory 380 V Voltage of Customer Factory 380 V This machine is shipped with voltage set to 220 V specification. Please arrange transformer if necessary. (Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and ala
    Frequency 50 Hz Frequency 50 Hz This machine is shipped with frequency set to 50 Hz specification. (Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and fr
    Setting Unit mm Setting Unit, MM The unit to be used for the screen display and program commands is set to millimeter (mm). Turning: MM specification for the turret Horizontal machining center: MM specification for the tapped pallet
    Interpolation Turning Interpolation Turning This function enables to create programs for turning in which the milling spindle rotation and the arc movement are synchronized. X-axis and Y-axis are synchronized in helical interpolation and tool spindle is controlled as spind
    MPC (Machine Protection Control) MPC (Machine Protection Control) It monitors vibration with acceleration sensors mounted on the spindle. This technology cycle stops the spindle to minimize the damage to the machine when abnormal vibration value is detected. It is also equipped with
    MVC (Machine Vibration Control) MVC (Machine Vibration Control) It is technology cycle for supporting the optimal machining by controlling vibrations. The acceleration sensor mounted in the spindle detects the vibration, and displays optimal machining conditions based on the vibratio
    Fast data server (excluding memory card) Fast Data Server (Excluding Memory Card for Data Server) The NC data can be transferred between the built-in HDD on a PC and the data server using FTP. The transferred program can executed as a sub-program (M198). *The memory card for the data server i
    E77105 Memory card for Data server (CF card 1 GB) Memory card for Data server (CF card 1 GB) Memory card (CF card) for Fast data server. The storage area for NC data is 1 GB.
    3-D coordinate conversion 3-D coordinate conversion By specifying the center of rotation, the direction of the center axis of rotation, and the angle of rotation, it is possible to execute 3D coordinate conversion around the center axis of rotation. This is effective for machining
    3-D tool compensation 3-D tool compensation When using the tool radius offset C, offset can only be done in 2D on the selected plane. With 3D tool offset, on the other hand, the offset direction can be set in 3D using the program. The 3D tool offset direction is displayed as a
    Special equipment - 10MPa high pressure coolant I / F (difference from standard OP) - Transformer

Send request

More machines from DMG MORI Global Marketing GmbH