529,792 active members*
3,749 visitors online*
Register for free
Login Register


DMG MORI Global Marketing GmbH
80807 München
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMC 1850 V (Reference-Nr. 051007)

Asking price

  • Reference number 051007
    Manufacture Year 2018
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining Centers (Vertical)
  • Heidenhain

  • General
    Vertical-Machining centre Direct Measuring system X,Y,Z; Control: CELOS with Heidenhain TNC 640
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-42000/1-42000/1-42000 mm/min
    Rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
    Working area 1
    Longitudinal 1850 mm
    Cross 700 mm
    Vertical 550 mm
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 40

  • Main drive Type of main drive AC
    Drive power (100% DC) 32 kW
    Drive power (40% DC) 44 kW
    Speed range 20-12000 rpm
    Spindle taper SK50 Tool holder DIN ISO 7388-1-A50
    Table Table surface 2160 x 750 mm
    Maximum load (table centre) 3000 Kg
    Slot width 14 mm
    Number of Slots 7
    Distance between T-Slots 100 mm
    Tool magazine 40 pockets Tool magazine 40 pockets SK50 chain magazine with pockets and double gripper, incl. manually direct loading into the tool magazine
    Internal coolant supply basic package 3 Internal coolant supply basic package 3 contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 40 Bar // 580 psi Tank capacity: 600l // 158,5 gallon Chip conveyor, Bed flushing, Chip flushing working area, Cabin roof double cartidge
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air with low oil rate
    Oil- and emulsion mist separator mechanical Oil- and emulsion mist separator mechanical (only available with option cabin roof)
    Coolant-air blast change-over Coolant - Air-blast changeover external switchable via M-Function
    Laminated safety glasses front doors Laminated safety glasses for front doors
    Rotating clear-view windows Rotating clear-view windows (2 pieces) (only available with option cabin roof)
    Tool measuring device TT160 Tool measuring device Heidenhain TT160 Install on console beside working table Tool length and diameter measurement with Cleaning air-blast, Calibration Tool
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Infrared measuring probe TS649 DMG Infrared touch probe make Heidenhain TS 649 DMG
    Door drive for working area doors Door drive for working area doors opening and closing via electrical door drive, incl. safety sensor for accident prevention, start opening and closing via button at the control panel. Remark: Not possible for automation!
    Safety package for power failure (incl. IPC) Safety package for power failure: Package for power failure IPC CELOS (for proper shutdown of IPC); Overload limiter, Undervoltage monitoring with fast deceleration control
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    DMG MORI NETSERVICE DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
    IoT connector DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
    SERVICE AGENT (CELOS) SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
    MESSENGER (CELOS) MESENGER (CELOS) Clear live status of the networked machines
    Special equipment Warm Up / Wake up Specialversion

Send request

More machines from DMG MORI Global Marketing GmbH