DMC 650 V (Reference-Nr. 050969)

•  
  Reference number 050969

  Manufacture Year 2017

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Machining centres
• Type of Machine
  Machining Centers (Vertical)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Vertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	1-42000/1-42000/1-42000 mm/min
  Rapid traverse longitudinal/transverse/vertical	42/42/42 m/min
  Working area 1
  Longitudinal	650 mm
  Cross	520 mm
  Vertical	475 mm
  Tool changer
  Type of magazine	Wheel
  Type of gripper	Double gripper
  Number of tools	30

• Specification
  
  

  Table	Table surface 960 x 570 mm
  	Maximum load (table centre) 800 Kg
  	Slot width 14 mm
  	Number of Slots 5
  	Distance between T-Slots 100 mm
  Infrared measuring probe PP60 optical	Infrared touch Probe make Renishaw PP 60 optical (OMP 60)
  Laser tool measuring	Laser tool measuring, Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Internal coolant supply basic package 3	Internal coolant supply basic package 3 contents: Rotary inlet for spindle, Internal coolant supply Papertype-Filter 40 Bar / 580 psi Tank capacity: 600l / 158,5 US gallons Chip conveyor, Chip flushing working area Cabin roof
  Advanced bed flushing	Advanced bed flushing Additional rinsing line on the right side panel, flushing volume of the entire bed flushing is manually adjustable (only in combination with job package or internal coolant supply basic package 1,2,3,4)
  Oil- and emulsion mist separator mechanical	Oil- and emulsion mist separator mechanical (only available with option cabin roof)
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air with low oil rate
  Rotating clear-view window	Rotating clear-view window (only available with option cabin roof)
  Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Safety package for power failure (incl. IPC)	Safety package for power failure: Package for power failure IPC CELOS (for proper shutdown of IPC); Overload limiter, Undervoltage monitoring with fast deceleration control
  Energy meter for Siemens 840 sl OP CELOS	Energy meter for 3D control Siemens 840D solutionline Operate with CELOS
  Coolant-air blast change-over	Coolant - Air-blast changeover external switchable via M-Function
  Machine documentation on CD-ROM	Machine documentation on CD-ROM: operating instructions, programming instructions, technic mechanical, technic electrical, parts catalogue
  Coolant unit for electrical cabinet	Cooling unit for electrical cabinet recommended for ambient temperatures above 35 °C up to a maximum of 50 °C
  NETSERVICE (CELOS)	Netservice Qualified support by Internet-based remote diagnostics
  SERVICE AGENT (CELOS)	SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
  MESSENGER (CELOS)	MESENGER (CELOS) Clear live status of the networked machines
  Special equipment	- Spindle speed up to 20 - 40,000 rpm with shaft cooling for tool holder HSK-E50 according to DIN69893 - Tool magazine 30 places HSK-E50

I like it 0