496,342 active members
7,495 visitors online
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

DMC 650 V (Reference-Nr. 050970)

Asking price


  • Reference number 050970
    Manufacture Year 2016
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining Centers (Vertical)
  • DMG MORI
  • Heidenhain

  • General
    Vertical machining center in C-frame-design New DMG MORI Design Direct Measuring system X,Y,Z; Control: 3D-Control Heidenhain TNC 640
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-42000/1-42000/1-42000 mm/min
    Rapid traverse longitudinal/transverse/vertical 42/42/42 m/min
    Working area 1
    Longitudinal 650 mm
    Cross 520 mm
    Vertical 475 mm
    Tool changer
    Type of magazine Wheel
    Type of gripper Double gripper
    Number of tools 30

  • Table Table surface 960 x 570 mm
    Maximum load (table centre) 800 Kg
    Slot width 14 mm
    Number of Slots 5
    Distance between T-Slots 100 mm
    Infrared measuring probe PP60 optical Infrared touch Probe make Renishaw PP 60 optical (OMP 60)
    Laser tool measuring Laser tool measuring, Tool lenght and diameter measuring automatically cleaning through external airblast Calibration tool with taper
    Cabin roof Cabin roof (loading by crane possible)
    Safety package for power failure Safety package for power failure: Overload limiter, Undervoltage monitoring with fast deceleration control
    Coolant-air blast change-over Coolant - Air-blast changeover external switchable via M-Function
    Package for tropical climate Package for tropical climate for ambient temperature max. 50°Celsius: includes active cooling for electrical cabinet, active cooling main spindle drive / motor spindle
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!
    Special equipment Water / air cooler control cabinet (Rittal) Fischer spindle 40,000 rpm HSK-E50 without shaft cooling Performance data 19.5 / 15KW / 16NM 12Nm (40% ED / 100% ED) including MPC Tool magazine 30 places with HSK-E50 Including direct position measuring syste
    Special equipment - Graphite extraction Keller L-CUT 1 with regulated fresh air supply included preparation - Improved extraction in chip container - Double scrapers - Torque ripple compensation - Extended nozzles on blown air

Send request

More machines from DMG MORI Global Marketing GmbH