DMU 80 P duoBLOCK (Reference-Nr. 040641)

•  
  Reference number 040641

  Manufacture Year 2019

  Operation Hours not applicable
• Main Category
  Metal working machines
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  Universal milling machine with duoblock construction; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	800 mm
  Cross	1050 mm
  Vertical	850 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	60000/60000/60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min
  Tool changer
  Application	Universal
  Type of magazine	Wheel
  Tool changer plane	horizontal
  Type of gripper	Double gripper
  Number of tools	123

• Specification
  
  

  Coolant supply ICS	Coolant supply: coolant through spindle centre form AD 40 bar/23 l/min(theoretical pump performance) rotating clear-view window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar, 6 water jets, 4 air jets) pump output (theoretic
  Chip removal	Chip removal: 2 worm conveyors in the machine bed convey into a chip conveyor (scraper flight conveyor), with interval control, placed at right angles. discharge height: 950 mm / 37.4 in width: 380 mm / 14.9 in
  NC rotary table	Type of Measuring system Direct measuring system
  	Rotation speed max.4. Axis 40 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 11
  	Slot width 14 mm
  	Maximum load (table centre) 1800 Kg
  	Centre bore 50H6 mm
  	Table surface 900 x 700 mm
  Integrated motor spindle speedMASTER®	Drive power (100% DC) 25 kW
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Drive power (40% DC) 35 kW
  Universal milling head with controlled B-axis	Universal milling head with controlled B-axis HSK-A 63 - Continuously positioning universal milling head (B-axis) with integrated motor spindle for 5 axes positioning and simultaneous machining. - Main drive: integrated motor spindle (same as standard
  	Clamping System HSK-A 63
  	Spindle taper HSK-A 63
  	Speed range - 15000 rpm
  	Torque (40% DC) 130 Nm
  	Torque (100% DC) 86 Nm
  Cabine	Full protection cabin
  Spindle taper HSK-A 63	Spindle taper for HSK-A 63 to DIN 69893 (incl. taper cleaning, adaptation working spindle, tool changer and tool magazine)
  Taper cleaning brushes	Taper cleaning unit with rotating brushes for spindle taper HSK
  Tool magazine, wheel, 123 pockets	Tool magazine wheel magazine (2 wheels) with 123 tool pockets HSK-A 63
  Operation panel for loading station tool magazine	Control panel for loading station tool magazine with TFT screen 15” Input on touch screen Windows 10 IoT Enterprise LTSB - 64 bit
  Tool measuring in machining area Blum Laser	Tool measuring in machining area Blum Laser DIGILOG Automatic retraction of the measuring unit in a protected housing, Tool length and diameter measurement in horizontal/ vertical position
  3D quickSET extension package	3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools)
  Tool breakage control mechanical	Tool breakage control mechanical version
  Maintenance Package I4.0	Maintenance Package I4.0: - measurement of tool pull-in force - autom. lubrication of tool clamp - monitoring of pneumatics
  Tool identification (TDS)	Tool identification (Tool Dialogue System TDS) Type Balluff, data carrier BIS C-122-04/L Reading writing station at the tool magazine Reading/Writing manually, contactless with chip
  CELOS Surface Analyzer	Surface Analyzer and touch probe TC60 Roughness gauges for the machine- integrated quality monitoring of surfaces
  TCC Tool Control Center basic HSK-A63	TCC Tool Control Center basic HSK-A63 - Detection of soiling at the tool interface - Spindle protection by monitoring the max. forces - Determination of the tool pull-in force
  TCC Tool Control Center advanced	TCC Tool Control Center advanced - Extension of the functional scope of the option TCC basic - Tool- and workpiece protection - Visualization of the cutting symmetry - Machine Protection Control MPC
  Spray pistol 3 bar - 40 l/min	Spray pistol 3 bar - 40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Interface for Oil and emulsion mist separator	Interface mechanical and elektrical for oil- and emulsion mist separator
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  MDynamics package	Deckel Maho package MDynamics Improved surface quality combined with reduced machining time
  Interpolation turning	Interpolation turning Turning-recessing cycle Manufacture of simple sealing surfaces and grooves using Machining Centres. For Siemens control only in horizontal and vertical plane
  DMG MORI NETSERVICE	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoT connector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  SERVICE AGENT (CELOS)	SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
  MESSENGER (CELOS)	MESENGER (CELOS) Clear live status of the networked machines

I like it 0