ecoMill 50 (Reference-Nr. 065291)

•  
  Reference number 065291

  Manufacture Year 2016

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Heidenhain
• Description
  
  

  General
  Universal Milling Machines; Control: 3D-control Heidenhain TNC 620
  Working area 1
  Longitudinal	500 mm
  Cross	450 mm
  Vertical	400 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	24000/24000/24000 mm/min
  Rapid traverse longitudinal/transverse/vertical	24/24/24 m/min
  Floor space/Weight
  Dimensions (L x W x H)	4,08 x 2,86 x 2,71 m
  Weight approx.	4700 Kg

• Specification
  
  

  Swivel Rotary Table Powered B/C Axes	Swivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!
  	Type of Measuring system Direct measuring system
  	Table surface Ø 630 x 500 mm
  	Maximum load (table centre) 200 Kg
  	Slot width 14 mm
  	5. Axes (swivelling range) -5/+110 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Distance between T-Slots 63 mm
  	Number of Slots 7
  Main drive	Type of main drive AC
  	Drive power (100% DC) 9 kW
  	Drive power (40% DC) 13 kW
  	Speed range 20 - 12000 rpm
  	Spindle taper BT 40
  	Clamping System DIN 69872
  Tool magazine 32 places	Tool Magazine 32 Places Chain with pockets and with double gripper
  Tool clamping for BT40	Tool clamping BT 40 for pull-studs DIN 69872 (differently from standard)
  Production-Package 1	Production-Package 1 contents: - Internal coolant supply 12bar; - Tank capacity: 360l; - Chip conveyor; - Cabin on top closed; - Coolant spray gun for swarf removal; - Coolant air-blast changeover external switchable via M-Function; - Signal lamp 4 colo
  Preparation 3D quickSET	Machine Preparation for use of the 3D quickSET Toolkit. included is the Software option for 3D quickSET for one machine. 5-Axis machine configurations with Heidenhain measuring cycles KinemtaicOpt (only with option Touch Probe)
  Direct measuring system X,Y,Z	Direct measuring system X, Y, Z inclusive Air purge for measuring system
  DMG ECOLINE Twin Probe-Kit for DMU 50eco	RENISHAW touch probe-kit consisting of: - OMP40-2 probe with optical signal transmission - TS27R probe for tool measurement - OMI-2C optical transmission module - plastic carrying case

I like it 0