512,915 active members
3,011 visitors online
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

MILLTAP 700 (Reference-Nr. 065261)

Asking price


  • Reference number 065261
    Manufacture Year 2019
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Siemens

  • General
    High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D Control Siemens 840D solutionline
    Technical Data
    Feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
    Working area 1
    Longitudinal 700 mm
    Cross 420 mm
    Vertical 380 mm
    Floor space/Weight
    Dimensions (L x W x H) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
    Weight approx. 4250 Kg

  • Spindle speed up to 24,000 r.p.m. BT30 Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
    Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -100 / + 120 degree Max. load C-axis 100kg Table diameter C-Axis d200mm Inclusive Software package Job Shop and Sinumerik M
    Lead through for integrated swivel rotary table Rotary lead through for integrated swivel rotary table with torque drives 4- flute, 2x for air, 2x for oil Including fix plate and fast coupling at machine rear side
    Digital Progress Panel PROGRESSline Digital Cycle-time Graphic rest time Product counter
    Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
    RENISHAW touch probe-Kit for MillTap 700 RENISHAW measuring-Kit for MillTap 700 suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration to
    3D quickSET 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations for the integrated swivel rotary table simultaneous (only with option touch probe)
    Signal lamp 4-colour standard Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Automation interface door right Automation interface inclusive Automation door right and pre- paration Hydraulic interface
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!
    Special equipment - Lehmann internal cooling system - COMPACT internal coolant supply 40 bar on chip conveyor: Chip conveyor with 5801 KM volume, with Band filter and attached Flow filter and ICS pump 40 bar, Chip flow 10-20 cm3/min - Chip wagon MT Design
    Special equipment - 5-axis table Tabletop with adapted Clamping surface, geometry and adjacent construction according to drawing no. 2912493 Rev.006 - Hydraulic clamping 120bar, 2 clamping circuits - Working space rinsing

Send request

More machines from DMG MORI Global Marketing GmbH