541,803 active members*
3,705 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

MILLTAP 700 (Reference-Nr. 065302)

Asking price


  • Reference number 065302
    Manufacture Year 2021
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Siemens

  • Technical Data
    Feed rate longitudinal/transverse/vertical 1-60000/1-60000/1-60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
    General
    High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D Control Siemens 840D solutionline
    Working area 1
    Longitudinal 700 mm
    Cross 420 mm
    Vertical 380 mm
    Floor space/Weight
    Dimensions (L x W x H) 1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
    Weight approx. 4100 Kg

  • Spindle speed up to 24,000 r.p.m. BT30 Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
    Table Table surface 840 x 420 mm
    Maximum load (table centre) 300 Kg
    Slot width 14 mm
    Number of Slots 1
    Clamping grid M 12, 100 x 100 mm
    Tool magazine 25 places Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
    Preparation hydraulic interface Preparation for hydraulic clamping 1 clamping circuit preparation clamping hydraulic (1x clamping / 1x unclamping) Fast couplings for 2 connection hydraulic and 2 connection pneumatic at front of machine table tubes from machine rear side to table i
    RENISHAW touch probe-Kit for MillTap 700 RENISHAW measuring-Kit for MillTap 700 suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration to
    Signal lamp 4-colour standard Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Production package band filter ICS 40bar Production package Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gu
    Software package Job Shop and Sinumerik Mdynamics Software package Job Shop and Sinumerik Mdynamics Data memory extention 2GB-Flashcard Shop Mill, Extensive interactive programming solutions Measuring cycles 3-D work piece presentation High speed 3-D processing and Advanced Surface Transmit Cylinder int
    Air blast through spindle center only with ICS Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible!
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!

Send request

More products from DMG MORI Global Marketing GmbH