MILLTAP 700 (Reference-Nr. 065303)

•  
  Reference number 065303

  Manufacture Year 2021

  Operation Hours not applicable
• Main Category
  Metal working machine
• Category
  Machining centres
• Type of Machine
  Machining centres (Universal)
• Manufacturer
  DMG MORI
• Control
  Siemens
• Description
  
  

  General
  High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D Control Siemens 840D solutionline
  Technical Data
  Feed rate longitudinal/transverse/vertical	1-60000/1-60000/1-60000 mm/min
  Rapid traverse longitudinal/transverse/vertical	60/60/60 m/min
  Working area 1
  Longitudinal	700 mm
  Cross	420 mm
  Vertical	380 mm
  Floor space/Weight
  Dimensions (L x W x H)	1,65 x 2,34 x 2,5 (1,65 x 2,95 x 2,55) m
  Weight approx.	4100 Kg

• Specification
  
  

  Spindle speed up to 24,000 r.p.m. BT30	Spindle 24,000rpm with tool taper BT30 JIS B 6339 (MAS 403-45°) AC-Motor 20 / 4 KW (max. / 100% ED) Watercooling Spindle and Spindle motor via heat exchanger (fan)
  Integrated swivel rotary table simultaneous	Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -100 / + 120 degree Max. load C-axis 100kg Table diameter C-Axis d200mm Inclusive Software package Job Shop and Sinumerik M
  Tool magazine 25 places	Tool magazine 25 places (suitable for inclusion in the tool spindle) Chip-to-chip time 1.7 sec
  RENISHAW touch probe-Kit for MillTap 700	RENISHAW measuring-Kit for MillTap 700 suitable to tool taper System in Spindle OMP40-2 touch probe with optical signal transmission OTS wireless probe with air purge on machine table OMI-2T optical transmission module Plastic carrying case Calibration to
  3D quickSET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations for the integrated swivel rotary table simultaneous (only with option touch probe)
  Signal lamp 4-colour standard	Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
  Production package band filter ICS 40bar	Production package Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gu
  Automation interface door right	Automation interface inclusive Automation door right and pre- paration Hydraulic interface
  Air blast through spindle center only with ICS	Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible!
  DMG MORI Netservice - client	DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!

I like it 0