534,847 active members*
1,809 visitors online*
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

NMH6300 (Reference-Nr. 064036)

Asking price


  • Reference number 064036
    Manufacture Year 2020
    Operation Hours not applicable
  • Metal working machine
  • Machining centres
  • Machining centres (Universal)
  • DMG MORI
  • Fanuc

  • General
    Horizontal 5-Axes Machining Centre; Control: Control F31iA5
    Characteristics
    Speed max. -8000 rpm
    Drive power (100% DC) 30 kW
    Movement X / Y / Z 1400/1200/1200 mm
    Rapid feed X / Y / Z 50/50/50 m/min
    Spindle taper BT 50
    Weight approx. 34100 Kg

  • Pallet changer with trunnion type tilting table Table surface 630 x 630 mm
    Maximum load (table centre) 800 Kg
    4. Axes (swivelling range) 360 x 0,001 degree
    5. Axes (swivelling range) +30/-120 degree
    Preparation for Center Through-spindle coolant system Center Through-Spindle Coolant System It can supply coolant through the holes of the spindle and tool. The coolant supply path to the tool tip is a center-through type. Effective for removing chips, cooling a machining point and prolonging a tool life.
    Interface for Through-spindle coolant system (center through, 7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for Through-Spindle Coolant System (8 Steps Pressure) (Center Through) Interface for mounting the high-pressure coolant system (separate type). Supplies the high-pressure coolant to the tool tip from the center of the spindle through the reten
    Coolant chiller Coolant chiller (separate type) The coolant chiller cools coolant in the coolant tank according to a rise in the machine temperature. Controlling the coolant temperature suppresses the rise in temperature of the workpiece, tool and table and achieves th
    Rotary window Rotary window The rotary window is fixed inside the window at the machining side door. Glass disc of the rotary window rotates by air drive to remove coolant adhering inside of the window with centrifugal force. -Air drive system -Outer diameter: 239 mm
    Coolant gun for setup station side Coolant Gun for Setup Station Side The coolant gun is mounted on the left side of the setup station door for cleaning chips adhering to the workpiece or fixtures. Pulling out the coolant gun from the holder activates the dedicated coolant pump, and pu
    Oil skimmer (Screw type) Oil Skimmer It removes oil that floats on the surface of coolant in the coolant tank to maintain the coolant quality and inhibit the coolant deterioration. This can reduce the coolant disposal cost. The screw type oil skimmer is adopted, which separate
    In-machine measuring system (spindle) optical type touch sensor (RENISHAW, OMP60) + workpiece setter function In-machine measuring system (spindle) optical type touch sensor (RENISHAW, OMP60) + workpiece setter function Installation of the optical spindle touch sensor manufactured by Renishaw. Mounting the touch sensor on the spindle enables positioning the workp
    Calibration ball for offset center of rotation Calibration ball for offset center of rotation If the locations of the rotation/tilting axis and the perpendicular axes are changed due to deterioration over time or thermal displacement of the machine, it may adversely affect the machining accuracy. The
    Outside step for machining side Outside step for operation panel side
    10 external M-codes 10 External M-Codes 10 M-codes are added for general purpose use by customers. The terminal blocks are provided for output/completion of the added M-codes. When the M-code is specified, the signal is output to the terminal block relayed to the relay ci
    Voltage of Customer Factory 380 V Voltage of Customer Factory 380 V This machine is shipped with voltage set to 220 V specification. Please arrange transformer if necessary. (Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and ala
    Frequency 50 Hz Frequency 50 Hz This machine is shipped with frequency set to 50 Hz specification. (Caution) IF the setting is incompatible, there is a possibility of trouble such as operation abnormality and alarm occurrence. Be sure to check the supply voltage and fr
    Setting Unit mm Setting Unit, MM The unit to be used for the screen display and program commands is set to millimeter (mm). Turning: MM specification for the turret Horizontal machining center: MM specification for the tapped pallet
    Stored stroke check 2, 3 Stored Stroke Check 2, 3 Using the parameter setting or the program commands, the boundaries between the effective tool travel zone and the entry prohibition zone. This stops the machine just before the tool enters the defined entry prohibition zone. W
    Part program storage length 8 MB (20,480 m) in total + Registerable programs 1,000 in total (AI contour control II is needed) Part program storage length 8 MB (20,480 m) in total + Registerable programs 1,000 in total (AI contour control II is needed) The storage capacity can be increased to 8 MB (20,480 m), and up to 1,000 programs can be registered.
    3rd, 4th reference position return 3rd, 4th reference position return The 3rd and 4th reference position return functions can be provided. Specifying the following programs executes the operation. ·G30 P3 IP_; 3rd reference position return ·G30 P4 IP_; 4th reference position return
    Manual handle interruption Manual Handle Interruption For slightly shifting the tool or making it cut in during the automatic operation, rotating the manual pulse generator can moves the tool by the amount of the output pulses without suspending the machining. Afterwards, the work
    Program restart The program restart function allows the program to be restarted from a desired block if a tool is broken or for restarting the suspended operation after holidays. To restart the program, specify the sequence number of the block or the block number to be r
    Adaptive control Adaptive Control It adjusts the control system parameters optimally according to the load detected during machining. The feed override is automatically controlled to optimize the load if the preset upper or lower limit of load is exceeded.
    Additional workpiece coordinate systems 48 sets Additional workpiece coordinate systems 48 sets When the standard 6 sets of workpiece coordinate systems (G54 - G59) are not sufficient, up to 48 sets of workpiece coordinate systems can be added.
    Coordinate system rotation Coordinate system rotation Shapes specified by programs can rotate centering around a fixed point.
    Tool offsets 99 sets in total 99 Sets of Tool Offset in Total 99 sets of tool offset can be registered in total. The offset amounts of tool length, tool diameter and tool position can be registered for each set of tool offset, and up to 99 tools can have the one set of tool offset
    Special equipment - 10MPa high pressure coolant I / F (difference from standard OP) - 100 BAR Pump and Filter support 30 l/min - Transformer

Send request

More machines from DMG MORI Global Marketing GmbH