502,876 active members
5,064 visitors online
Register for free
Login Register
DMG MORI

Contact

DMG MORI Global Marketing GmbH
Walter-Gropius-Str.7
80807 München
Germany
+49 (0) 89 / 24 88 359 00
+49 (0) 89 / 24 88 359 02

Route planner

Route planner

A18S (Reference-Nr. 071252)

Asking price


  • Reference number 071252
    Manufacture Year 2016
    Operation Hours not applicable
  • Metal working machine
  • Lathes
  • Turret lathes (Capstan) and turret automatics
  • DMG MORI
  • Fanuc

  • General
    Universal Turning Machine; Control: FANUC 0i-TD
    Working area
    Bar diameter max. 67 mm
    Main drive 1
    Drive power (100% DC) 7,5 kW
    Drive power (40% DC) 11 kW
    Speed range -4000 rpm
    Tool holder 1
    Number of tool stations 18

  • EN Standard [Loader] Destination Europe [Loader]
    Rotary tool spindle 10,000 min-1, 5.5/3.7 kW Standard rotary tool spindle 10,000 min-1, 5.5/3.7 kW
    Chip conveyor I/F without standard chip bucket Chip conveyor I/F without standard chip bucket Chip conveyor Interface
    Coolant tank Coolant tank Coolant tank capacity : 140L Coolant Tank is separate from machine body for easy cleaning.
    Chuck top coolant Chuck top coolant Overhead coolant: over top of Chuck coolant nozzle, turns On/Off by switch on the operator's panel or M-code. Useful for flushing cutting chips and cool to down the workpiece.
    Coolant for tool tip Coolant for tool tip Coolant for Turret stationt : It turns On/Off by switch on the operator's panel or M-code. Useful for flushing cutting chips and cool to down the workpiece.
    Air blow for chuck Air blow for chuck Removes adhered chips by air blow. Air blow by M code in a program.
    Gantry-type loader SR-1 B-axis(loader unit left/right)=2000st, Y-axis(hand up/down)=720st Gantry-type loader SR-1 B-axis(loader unit left/right)=2000st, Y-axis(hand up/down)=720st B-axis stroke 2,000mm Y-axis stroke 720mm Rapid Travis speed B-axis120m/min Y-axis80m/min Max part size dia.80 x L50 Max part weight 1.0Kg x 2
    Swivel hand [SR-1 hand] Swivel hand [SR-1 hand] 90 Degree Orthogonal hand for Product and Material hand with air pusher on Material hand. Hand stroke dia 10 mm. Maximum part weight 1.0Kg x 2
    Load monitor function for B-axis(loader unit left/right) Load monitor function for B-axis(loader unit left/right) Machine will alarm and enter Temp stop condition if B Axis load exceeds set point while loading/unloading work piece.
    Workpiece conveyor for WRS-1 width120mm Workpiece conveyor for WRS-1 width120mm Out conveyor for WRS-1: Mounted to WRS-1 and includes full work sensor
    SBHC68966 Loader hand jaws forming fixture for SR-1 hand SBHC68966 Loader hand jaws forming fixture for SR-1 hand Loader hand jaws forming fixture for SR-1 hand
    Spare parts for SR-1 hand Spare parts for SR-1 hand The bolt for loader pusher
    10-station rotary workstocker WRS-1 [ with cover ] 10-station rotary workstocker WRS-1 [ with cover ] 10 station rotary stocker Type:WRS-1 Maximum part diameter : dia.95(O.D guide) dia.120(I.D guide) Minimum part diameter : dia.8(O.D guide) dia.32(I.D guide) Part stack work height: 350mm
    Ceiling shutter open & close switch Ceiling shutter open & close switch Top shutter door open/close switch on operators panel for loader spec.
    Alarm message function Alarm message function Display Alarm message on LCD
    Air pressure detection Air pressure detection The machine will go into emergency stop/temp stop condition when the air pressure is lower than setting value.
    Lubrication oil detection (without LED) Lubrication oil detection (without LED) M code will not finish or prohibit cycle start when lubrication oil level is low. (Does not include LED lamp on operator's panel)
    Hydraulic pressure detection Hydraulic pressure detection Machine will go into emergency stop/temp stop condition when the hydraulic pressure is lower than setting value.
    Name plate[Overseas] Name plate[Overseas] Warning/Safety name plate
    Wipe out function Wipe out function Cycle End Switch: When enabled the machine will complete all parts in cycle and stop for loader.
    Memory card for NC (512MB) Memory card for NC (512MB) Control back up containing cutting programs, loader programs, NC parameters and PMC ladder before ship out from factory.
    ZSBHB280741 Rotary tool holder adjust tool for dia.20 ZSBHB280741 Rotary tool holder adjust tool for dia.20 Rotary tool fixture jig, spanner wrench for 20mm dia and Rotary tool holder remove jig. Used for locking/unlocking milling collets
    5 x ZSBHB280731 O.D. cutting rotary tool holder (Max.dia.20, 10000min-1) [MXW-20] 5 x ZSBHB280731 O.D. cutting rotary tool holder (Max.dia.20, 10000min-1) [MXW-20]
    5 x SBHB28815 Face cutting rotary tool holder (Max.dia.20, 5000min-1) [MZW-20A] 5 x SBHB28815 Face cutting rotary tool holder (Max.dia.20, 5000min-1) [MZW-20A]

Send request

More machines from DMG MORI Global Marketing GmbH