General | |
Universal Machining Center ULTRASONIC hard machining & HSC milling on one single machine; Control: Siemens 840D solutionline | |
Working area 1 | |
Longitudinal | 120 mm |
Cross | 120 mm |
Vertical | 200 mm |
Main drive | Speed range 0 - 40000 rpm |
Spindle taper HSK-E 25 | |
Tool magazine | Number of tools 16 |
NC-swivel-/ rotary table Ø 190 mm | NC-swivel-/ rotary table - A-axis with direct torque motor Swivel range: -10º to 120º RPM: max. 100 1/min - C-Axis: NC-Rotary Table Ø 190 mm with direct torque motor integrated in swivel axis Range: 360° infinite RPM: max. 150 1/min. |
Signal lamp 4-colour | Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode |
Technology package: ULTRASONIC | - ULTRASONIC spindle Ultrasonic-Transmission via induction Max. RPM (ULTRASONIC): 40.000 1/min - Process monitoring: ULTRASONIC Parameter Detection (UPD) Automatic detection of the resonance- frequency in the machining process ULTRASONIC Auto Tunin |
Clamping system ITS - Base 100 | Zero point clamping system EROWA ITS 100 Chuck pre-installed on rotary table of the swivel- / rotary axis (air pressure supply of min. 6 bar requested) |
Flushing gun for machining room | Flushing gun for machine room |
Renishaw Laser System NC4-III | Renishaw Laser System NC-4 III Laser tool measurement max measurable tool Ø: max. 30 mm max. measurable tool length: 200 mm |
Separation Option for PH 2 / 120 | Separation-Option for PH 2 | 120 - Cut off each unit after finished manufacturing and discharging out of the working room. - Prime time parallel further processing of the finished parts is possible. |
Finished Part Reservoir f. PH 2 / 120 - PH 3 / 100 | Finished part reservoir for PH 2 | 120 76 pieces |
Special equipment | Transformer 40kVa |