G1221 Walter Cut grooving boring bar

2017-05-15 13:49 | 149 calls

THE APPLICATION
- First choice for internal grooving and recessing
– For all ISO material groups
– Internal grooves with a diameter starting from Dmin = 16 mm
– Grooving to a depth of Tmax = 9.5 mm
– Insert widths of 2, 3 and 4 mm
– For use with all lathes
– Can be used up to a maximum coolant pressure of 80 bar

THE TOOL
– Grooving boring bar G1221-P
– Precision coolant via the top clamp
– Re-sealable axial cooling bore for blind-hole machining
– Connection using K601 coolant set (G1/8” thread on shank) or installation, e.g. using a Weldon type adaptor
– Flexible O-ring seal for leakage-free coolant transfer between the tool and base adaptor
- Two clamping surfaces
– Right-hand and left-hand versions available

BENEFITS FOR YOU
- Interface between base adaptor and tool free from pressure loss thanks to O-ring seal
– Optimal surface quality, process reliability and chip evacuation
– Tool can be used in normal or overhead position
– Superlative machining results thanks to optimal L ×D ratio