Vertical machining with a unique concept:
DMC 850 V  /  DMC 1150 V
 
After the DMC 605 V’s successful premiere at EMO in Hannover, the DMC 850 V and DMC 1150 V complement the third generation vertical machining centres offered by DMG MORI. Among the many powerful equipment options are the 14,000 min^-1 spindle and a fixed machine table with a maximum load capacity of 1,000 kg in the case of the DMC 850 V. The DMC 1150 V features an even high load capacity of 1,500 kg. Rapid traverse rates of 36 m/min in all axes offer productive machining. By cooling the ball screw nuts and linear guides the frictional heat is effectively dissipated, improving accuracy. The work area of the DMC 850 V measures 850 x 520 x 475 mm. The DMC 1150 V achieves 1,150 x 700 x 550 mm and complements the range of vertical machining centres with an increased Y-axis travel of 700mm.
Both DMC V vertical machining centres are available with 19“ ERGOline^® with HEIDENHAIN TNC 640 as well as Operate 4.5 on SIEMENS 840D solutionline. Of course, these two world premieres also come with CELOS from DMG MORI with 19“ ERGOline^® and SIEMENS.

The new machines are presented als world premiere during the open house Pfronten. Register now online for the DMG MORI open house Pfronten.


DMG MORI Open House at DECKEL MAHO Pfronten, Germany
18 – 22 February 2014
 
Opening times:
9 am - 5 pm
 
Location:
DECKEL MAHO Pfronten
Deckel Maho Straße 1
87459 Pfronten
Germany
Ph: +49 (0) 83 63 / 89-0
Fax: +49 (0) 83 63 / 89-222

www.dmgmori.com