iF Design Award for DP2200

The industrial design team together with the project team at the awards ceremony: Arthur Homa, Volker Grein, Martin Schmidt, Linda Schmidt, Joachim Uffelmann, Philipp Karlin - unfortunately Christoph Stratmann and Hans-Jörg Huber are not in the photo.
The DP2200 threshold display provides customers with the possibility to visualize process values from sensors in industrial installations. These sensors are often installed in inaccessible areas outside the field of view. The compact design of the display allows the user to install it where it can be best accessed and seen. The red/green colour change of the LED interface indicating critical situations is clearly visible.
The display is designed so that it is visible through the translucent plastic. Another advantage of the display is its handling. The spring-loaded push rings of the interface operate magnetically. Therefore they are outside the sealing areas ensuring a higher protection class for the display. The user also gets a haptic feedback thanks to the spring action. These buttons allow to set the sensors which can only be accessed with difficulty.
In brief: The DP2200 is industry 4.0 at your fingertips in ifm corporate design: intuitive, compact and innovative.
The iF DESIGN AWARD
The iF DESIGN AWARD has been an internationally recognized trademark for design excellence for 65 years. It awards design performance in all disciplines: product, packaging, communication and service design/UX, architecture and interior design as well as professional concept.
Learn more about our display DP2200 - Evaluation system and display for analogue signals
Decentralised display, preprocessing and conversion of analogue signals
- Mini display to monitor values
- Clearly visible display with red/green colour change
- Compact design with protection rating IP 67
- Parameter setting via IO-Link
- Conversion of analogue measured values to an IO-Link communication
Analogue signals at a glance
The compact connector unit is simply inserted in the connection cable of analogue sensors (4...20 mA). It displays the measured values locally. The user can set a switch point or limit at which the transistor output switches. A colour change (red /green) of the display indicates this unmistakably. Critical process states or operational problems are reliably signalled.
Converter for Industry 4.0
A special feature is the signal conversion: The threshold display converts analogue signals to digital IO-Link signals. Today they are required in almost any modern industrial environment and for Industry 4.0 applications.