509,905 active members
1,546 visitors online
Register for free
Login Register
Innovalia Metrology Blog

ADALAM – a successfully completed Horizon 2020 project.

October 2018
15
Author: Innovalia Metrology
Company: Innovalia Metrology Munich
ADALAM – a successfully completed Horizon 2020 project.

The European Commission finalized the European project ADALAM led by Unimetrik, with a brilliant final review held in mid-September at The Netherlands. ADALAM is a Horizon 2020 project and it is to develop an adaptive laser micromachining system, based on ultrashort pulsed laser ablation and a novel depth measurement sensor, together with advanced data analysis software and automated system calibration routines and a verification device for this type of systems.

Unimetrik, part of Innovalia Metrology, is the project coordinator and together with CARSA and Datapixel are collaborating with other European institutions like Demcon, Focal, Fraunhofer IPT, Lumentum, Lightmotif, Sandvik, Sill and XYcarb Ceramics to make real ADALAM.

UNIMETRIK has been also in charge of the methodological characterization and evaluation of the complete measurement solution (sensor + machine kinematic) and its calibration and certification and thanks to ADALAM has improved a calibration methodology for laser-based manufacturing equipment and topography sensors in the micro-scale domain and (ii) consultancy services related to the error mapping definition, artefacts, and methodology.

ADALAM demonstrates once again the commitment of Innovalia Group with the technological development and the excellent positioning of the Group on the European Research Area.

0 comments

Blog Archiv

November 2019
August 2019
June 2019
May 2019
April 2019
March 2019
February 2019
January 2019
December 2018
November 2018
October 2018
September 2018
July 2018
June 2018
May 2018
April 2018
March 2018
February 2018
January 2018
December 2017
November 2017
October 2017
September 2017
August 2017
July 2017
June 2017
May 2017
April 2017
March 2017