Hello,
I need Fanuc OI posprocessor *.pst file. Can you help me
Thanks
Hello,
I need Fanuc OI posprocessor *.pst file. Can you help me
Thanks
THANK YOU SO MUCH
You are a life saver thank you. :-)
Need a post for a Hurco TM6i
Did you ever get that liobrary going. I have some new posts for gibbs coming but would also like to contibute and use posts from a shared compilation. It is a great idea for community and for those of us with small shops where every dollar matters. I have a 3 axis Centroid post that has worked for all centroid machines we have new and old and a Fadal 3016/4020 4 axis post arriving in email any day.
we still need robodrill fanauc 16i-m posts for 4/5 axis.
Hello.
Does anyone have post for HaasVF5 with trunnion TR310. ( A and C axis, simulateinious. )
Erik.
Would you have a post file for a Dawoo Puma 240-MA?
I have a collection of post files from different companies that I can send you to add to your collection. Contact me at. [email protected]
Hello,
Please help, i need post processor on turning centre DOOSAN PUMA GT2600M(Gibbscam)
Thank you very much to soon results
I looking for heidenhain 5 axis post do you have any
Looking for a post for oi tf lathe
I need on for a new post for haas vf and size 3 axis mill and one with 4 or 5 axis. My old one i use to use in gibbs 2010 does not like it when I try to post volumill operation in my 2017 version.
Yes I have post for haas A/C 5 ax PM me with your email
Hi all can someone help me with a post for Emco Hyperturn with fanuc 31i controller. Machine has 2 spindles and 2 turrets
Hello
i need post Gibbscam for turning Schaublin 125 CNN+Caxis (fanuc 0i+)
[email protected]
Thank
You can customise good POST and MachineSIM:
https://jeffcnc.weebly.com/cnc-progr...and-machinesim
HI
I'm Antonino and I write from Italy.
I am a CNC operator
and I have a homemade 5 axis machine with stepper motors and linuxcnc (iso)
I saw from the forum that you have a post for gibbsicam suitable for a 5-axis Haas machine.
I wonder if you would be willing to share it with me.
I would appreciate it if it were in metric rather than imperial.
I have some posts for both milling cutters and milling lathes in ISO that I can give you if you want.
I thank you in advance
hoping to hear from you soon
E mail. [email protected]
Hello, I write from Spain. Please I need the Gibbscam Post for Fagor 8055 4 axis.
I would be eternally grateful.
Thank you