Re: Tailstock alignment on ST-30Y
500 foot-pounds and so far we can't even break then loos
hy, i don;t have exp with hass, but for some similar tailstocks i used a long wrench; may be needed to use a 2nd person to keep the allen key pressed
This is where the jack screws are. In the second pic there are no cutouts, and no jack screws that we can find
not all models have jackwcres; unmount the big screws 1st, then perhaps it will move free / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg