Install the right one from the bottom, pushing it up against the foot blocks.
Attachment 506268
Install the right one from the bottom, pushing it up against the foot blocks.
Attachment 506268
Leave some slack for the coolant return tube to pull out catch basin 5"-6" for cleaning.
Attachment 506330
![]()
.
The vacuum system.
Remove the screws and plug on the left side.
Attachment 506368
.
Can be installed on many designs.
Tool changes without removing anything but the magnetic brush ring.
For 80mm to 100mm spindles.
Threaded 4" hose connector.
Brushes for 1/2", 3/4", and 1" cutting depth bits.
Attachment 506718
![]()