In the not included list of my previous post the spindle was omitted.
Just to clarify, the machine accepts all 80mm air or water cooled spindles which is not included in the set.
Hi David - Yep Jaffas are unique Oz/NZ lollies. Ideal for rolling down the isles of movie theatres is the urban legend... Peter
.
Spindle coolant system.
A low pressure, combined spindle coolant set.
Attachment 506050
Slide the complete set over the mounting plate on X carriage.
Attachment 506054
All wiring and plumbing in place.....
Attachment 506168
Hi David - Have you looked at multicore cable? I use 12 core and 16 core and it has made runs very easy and more compact. My supplier has 4 core thru to 25 core some with earth wire. Peter
Hi Peter - I use for this build Teknic's own signal cables. Somewhat reasonable and not worth fiddling around with Molex MiniFit Jr. receptacles.
In total, there are two 3/8 OD tubing, four servo signal cables, four servo power cables, spindle cable and a few small ones in the drag chain. I did not try to have a single multi core cable accommodate all of that.